Log in

thermel31 · 05-19-2014 09:46 PM

I was able to get the T42G phones to work but had to switch the phones firmware from the broadsoft version to 29.72.0.25. When I changed the firmware version it changed the LLDP capabilities from "Router and Telephone" to "Bridge and Telephone". The W52P's the LLDP capabilities are "Router and Telephone", I have tried different firmware on the W52P but everything stays the same. We use an another phone manufacturer and all of there models work but the LLDP capabilities are just "Telephone".

(05-17-2014 09:42 AM)Yealink Support Wrote: Can you configure Cisco SG300 with other phones successfully?
I think you can go to Cisco Forum. Anyway, i hope other forum member can help you.

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	W52P - Detected as Router and Telephone SG300 LLDP	jmtread	1	8,099	12-21-2018 12:27 AM Last Post: jmtread
	Register Fail - Cisco Unified Communications Manager	sirius	3	17,931	04-11-2018 06:44 AM Last Post: Bilal
	Blind transfer unsuccessful - W52P and Cisco Call Manager 9.1.2	fidotas	3	12,641	01-28-2016 03:37 AM Last Post: sirius
	Problem with W52P Base and Cisco POE	rjsears	7	19,278	03-26-2015 09:25 PM Last Post: James_Yealink

Threaded Mode \| Linear Mode Cisco SG300
Author	Message