[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
dialnow feature
Author Message
npereira Offline
Junior Member

Posts: 5
Joined: May 2014
Reputation: 0
Post: #1
dialnow feature
Hi all,

trying to setup the auto provision for my T46 and T42 so that if the user dials a 4 digit extension that starts between 1 and 6 that it automatically dials after the 1 second timer.

It works when setting on an individual phone using the web interface, but I need this in the phone provisioning template and based on the documents, it's not working and/or not clear how to setup.

My template is setup as:

#Configure the dialnow rule. X ranges from 1 to 20.
#dialnow.item.X = Dial-now rule,Line ID
#Dial-now rule: Specify the numbers that need replacing;
#Line ID:Specify the line ID to apply the replace rule,multiple lines must be separated by a comma;
dialnow.item.1 =

# X ranges from 1 to 100.
dialplan.dialnow.rule.1 = [1-6]xxx
dialplan.dialnow.line_id.1 = 0

Any help would be appreciated.

I found out that the dialnow feature can only be setup using the DialNow.xml file.
For anyone looking for this feature, here is how I have set it up for myself and tested working fine.

<?xml version="1.0" encoding="UTF-8"?>
<Data DialNowRule="[1-6]xxx" LineID="0"/>
  <Data DialNowRule="9999" LineID="0"/>

By setting the LineID="0" this basically applies to all line keys on the phone no matter what account.
(This post was last modified: 05-09-2014 11:04 PM by npereira.)
05-09-2014 10:04 PM
Find all posts by this user    like1    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
dialnow feature - npereira - 05-09-2014 10:04 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  V84 feature blf.enhanced brourk 4 4,914 10-04-2019 12:32 AM
Last Post: Oregon
  CP960 with SFB protect Basic and Feature settings geislinger 2 3,597 08-12-2019 01:15 PM
Last Post: geislinger
  Which RFC describes as-feature-event event package ? oliv 3 6,547 01-16-2019 04:45 PM
Last Post: jolouis
  How to disable the Dial-Upon-Lift feature Jeremy17 1 4,453 12-11-2017 01:33 AM
Last Post: Evan_Yealink
  Network Conference feature Sur 11 12,391 11-07-2017 07:25 AM
Last Post: Sur
  Autoanswer on click to dial feature Walter 8 19,188 05-04-2016 05:42 AM
Last Post: jmoore
  Broadsoft xsi feature Alka 14 32,367 12-04-2015 03:42 PM
Last Post: RonaldoRoss
  Disable Auto Answer Feature? sexy-trousers 2 8,291 11-07-2015 12:33 PM
Last Post: DeniseOlea
Exclamation Feature Request: More Time Zone Names lorn10 3 8,234 05-28-2015 05:43 AM
Last Post: Flora_Yealink
  T42G lost feature key after upgrade firmware npereira 3 8,573 05-26-2014 05:27 PM
Last Post: Yealink Support

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication