[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
LDAP No results
Author Message
danieljr Offline
Junior Member

Posts: 2
Joined: Mar 2014
Reputation: 0
Post: #1
LDAP No results

I have a problem with the LDAP on Yealink SIP-T32G. I will use My IP PBX (Grandstream UCM6102) as LDAP server but on the phone is de LDAP Phonebook empty.
Read the LDAP with the client for Windowws is not a problem (and i use the same configuration ...)

Any suggestions or solutions?


(Sorry for my bad englisch)

Configuration on IP telephone (Yealink)

LDAP Name Filter : (AccountNumber=%) LDAP Number Filter : (CallerIDName=%) Server Address : Port : 389 Base : dc=pbx,dc=com User Name : blanco OR cn=admin,dc=pbx,dc=com Password : blanco OR secret Max. Hits(1~32000) : 50 LDAP Name Attributes : CallerIDName LDAP Number Attributes : AccountNumber LDAP Display Name : %AccountNumber %CallerIDName Protocol : Version3 Search Delay(0~2000)ms : 2000 Match Incoming Calls : Enabled LDAP Sorting Results : Enabled LDAP Lookup For Pre-dial/Dial : Enabled


Information en parameters on IP PBX (Grandstream UCM6102)


LDAP Server configurations
Base DN: dc=pbx,dc=com
PBX DN: ou=pbx,dc=pbx,dc=com
Root DN: cn=admin,dc=pbx,dc=com
Root Password: secret
Confirm Root Password: secret

LDAP Client Configurations
1. Client Configuration Examples
Assuming the server base dn is 'dc=example', then you can configure your LDAP clients as follows (these configurations are case insensitive.):
Base DN:
dc=example (the same as the server base dn or a subset of the server base dn)
Login DN:
Please leave this field blank!
Please leave this field blank!
Please enable this option!

2. LDAP Configurations examples on Grandstream IP Phones
Server Address:
The IP address or domain name of this IP-PBX device.
Base DN:
dc=example (the same as the server base dn or a subset of the server base dn)
User Name:
Please leave this field blank!
Please leave this field blank!
LDAP Name Attributes:
CallerIDName Email Department FirstName LastName
LDAP Number Attributes:
AccountNumber MobileNumber HomeNumber Fax
LDAP Number Filter:
LDAP Name Filter:
LDAP Display Name:
AccountNumber CallerIDName
LDAP Version:
If this option exists, please choose 'version 3'.
03-27-2014 03:57 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
LDAP No results - danieljr - 03-27-2014 03:57 PM
RE: LDAP No results - Yealink Support - 03-27-2014, 07:57 PM
RE: LDAP No results - danieljr - 03-31-2014, 12:24 PM
RE: LDAP No results - Yealink Support - 03-31-2014, 05:15 PM
RE: LDAP No results - CWR - 03-31-2014, 07:15 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  LDAP server is unavailable Andrei9385 2 10,560 07-16-2021 08:34 PM
Last Post: nolto
  No LDAP entries from "objectClass = contact" MaksimKa 0 3,857 01-28-2020 01:35 PM
Last Post: MaksimKa
  LDAP configuration issue Vadim Volkov 1 6,408 12-04-2019 04:21 PM
Last Post: anonymous1718628087441
  No results using LDAP argh 8 23,956 10-04-2019 09:28 PM
Last Post: justingoldberg
  LDAP T23P and Yeastar ? Atontel 1 10,416 03-30-2017 01:01 PM
Last Post: Kevin_Yealink
  LDAP configuraton for Yealink T48G in Ubuntu sani390 2 8,985 03-09-2017 07:01 AM
Last Post: sani390
  LDAP only some results DeepB 2 10,970 07-10-2015 01:43 PM
Last Post: DeepB
  LDAP picture attribute gekran 15 62,261 10-04-2014 04:51 AM
Last Post: bsanders
  ldaps (ldap+ssl) support? tangledhelix 3 13,551 05-14-2014 03:29 PM
Last Post: Yealink Support

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication