[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G - Enable Time Zone Selection
Author Message
solutions@singlesource.net Offline

Posts: 2
Joined: Mar 2014
Reputation: 0
Post: #1
T46G - Enable Time Zone Selection
Using T46G behind Broadsoft firmware version I am looking for the configuration file that will allow me to choose a time zone so the phone will display the correct time. Currently this is only available via the GUI. Time zone defaults to -11 Samoa. This is my current configuration:

#Configure the domain name or the IP address of the NTP server. The default value is cn.pool.ntp.org.
local_time.ntp_server1 = %SNTP_SERVER_1%
local_time.ntp_server2 = %SNTP_SERVER_2%

#Configure the update interval (in seconds) when using the NTP server. The default value is 1000.
local_time.interval =

#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default);
local_time.summer_time = 2

#Configure the DST type when the DST feature is enabled; 0-By Date (default), 1-By Week;
local_time.dst_time_type =

#Configure the start time of DST. The default value is 1/1/0.
#If the DST type is configured as By Date, the value format is Month/Day/Hour. For example, the value 5/20/10 means the start time is at 10:00 on May 20.
#If the DST type is configured as By Week, the value format is Month/Day of Week/Day of Week Last in Month/Hour of Day.
#For example, the value 1/4/2/5 means the start time is at 5 o'clock on Tuesday of the 4th week in January.
local_time.start_time =

#Configure the end time of DST. The default value is 12/31/23. The value format is the same to the start time.
local_time.end_time =

#Configure the offset time (in minutes). It ranges from -300 to 300, the default value is 60.
local_time.offset_time =

#Configure the time format; 0-12 Hour, 1-24 Hour (default);
local_time.time_format = 0-12 Hour

#Configure the date format; 0-WWW MMM DD (default), 1-DD-MMM-YY, 2-YYYY-MM-DD, 3-DD/MM/YYYY, 4-MM/DD/YY, 5-DD MMM YYYY, 6-WWW DD MMM;
local_time.date_format =

#Enable or disable the DHCP Time; 0-Disabled (default), 1-Enabled;
local_time.dhcp_time =

local_time.manual_time_enable = 0

Thank you
03-10-2014 11:24 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
T46G - Enable Time Zone Selection - solutions@singlesource.net - 03-10-2014 11:24 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T46G - shortcut to activate/ deactivate accounts? westats 1 26 Yesterday 10:29 PM
Last Post: complex1
  LCD DSS keys displays large buttons over date / time xuan69 2 2,211 11-03-2021 06:57 PM
Last Post: xuan69
  Screensaver Wait time on T46S remi-it 3 2,869 10-21-2021 01:49 AM
Last Post: complex1
  Feature Request T46G - Return to page 1 imfloridaguy 4 8,449 08-30-2021 12:34 AM
Last Post: eric@hudsonvalleygeek.com
  T46G with EXP40 Sidecars Programming Burl 0 2,018 05-27-2021 11:35 PM
Last Post: Burl
  T46G/T48G no Ringtone because of 183 insted of ringing eurix 2 3,751 04-09-2021 05:16 PM
Last Post: eurix
  extend input time transfer Krisje 5 5,139 03-22-2021 11:29 PM
Last Post: complex1
Heart T46G/T46S - Permission Denied! andy.hughes@intelligencehs.co.uk 1 4,103 03-19-2021 08:59 PM
Last Post: Yisroel_MongoTEL
  yealink t46g Ssl VPN sarajennifer 0 2,280 03-11-2021 02:41 PM
Last Post: sarajennifer
  Call-Info sip header for T46G sidjf3zhdu 9 21,952 02-22-2021 04:06 PM
Last Post: jiansong

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication