[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Muticast paging issues
Author Message
RyanW Offline
Junior Member

Posts: 4
Joined: Feb 2014
Reputation: 0
Post: #1
Muticast paging issues
We have set up multicast paging on our system using the following directions.

Create Button for Paging:
On T2X series phone under DSS Key select either the memory key or line key you would like to use for paging.
Select Multicast page from drop down menu and Label as you wish.
In the Value Field type in a valid Multicast address and port number such as and save settings

Set up phones to Listen to Multicast address:
Under the contacts tab select Multicast Paging
You can enter up to 10 Multicast address and port combinations for the phone to listen to.
Enter the listening address for the page all in the box as above
Save settings

When the Page-All button is selected all phones set to listen to the multicast address will receive the page as long as they are in the same VLAN. To go across Layer 3 boundaries some routing magic will need done.

To create Zones simply group phones according to a different port number and assign a new memory or line key to page the appropriate multicast-address and port such at for Zone 1 paging, for Zone2 etc.

The paging feature works now but the only problem is that it puts all active calls on hold when someone uses this function.

What are we doing wrong?
02-20-2014 03:56 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
Muticast paging issues - RyanW - 02-20-2014 03:56 AM
RE: Muticast paging issues - CWR - 02-20-2014, 10:36 AM
RE: Muticast paging issues - RyanW - 02-20-2014, 10:33 PM
RE: Muticast paging issues - CWR - 02-25-2014, 07:02 AM
RE: Muticast paging issues - RyanW - 02-25-2014, 09:38 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  2-way paging with no indication on phone nolto 1 2,202 05-11-2023 11:20 PM
Last Post: Yisroel_MongoTEL
  Multicast / Paging / Intercom - Yealink T58 Ryandh 20 65,180 04-30-2020 03:23 PM
Last Post: Chris708
  Multicast Paging - Metaswitch EPP missing "Channel" ahull 1 6,712 11-27-2018 12:57 PM
Last Post: ahull
  MultiCast Paging CP860 admin.calgary.demac 4 15,829 09-02-2018 04:34 AM
Last Post: Infotec
  Multicast Paging force speaker jolouis 6 18,051 10-14-2016 10:15 PM
Last Post: jolouis
  T46G Issues Save Volume settings + BLF pickup Jeroen 3 14,303 08-31-2016 02:47 AM
Last Post: CWR
Information T28P Multicast Paging Volume fdtcloud 1 9,734 10-09-2014 08:14 PM
Last Post: Wilson_Yealink
  T46G Directory issues dwoods 8 26,845 01-02-2014 10:16 PM
Last Post: dwoods
  Multicast paging worked but no longer works anonymous1717158644942 3 14,435 08-13-2013 07:37 AM
Last Post: CWR
  Different paging rings? Crow2882 1 7,351 06-20-2013 02:18 PM
Last Post: Yealink Support

Forum Jump:

User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication