[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Call pickup on BLF not working on 7.72.0.1 [resolved 7.72.0.56.rom]
Author Message
temp0001 Offline
Junior Member
**

Posts: 16
Joined: Jan 2014
Reputation: 0
Post: #5
RE: Call pickup on BLF not working on 7.72.0.1
Hi Support,

I have tried that, but there are two problems:

1) I don't know what to use. Previously in the v61 firmware, I didn't have to enter anything in the 'Extension' box because it simply worked 'out of the box'.

2) The pickup codes I tried entering into the Extension box of a BLF DSS key (on v72 phones) don't seem to work at all. Putting the actual extension number in the Extension box doesn't work. I still get an "Address incomplete" error.

So my question now is, what Pickup Code did the v61 firmware send when pressing the BLF button whilst the monitored extension is ringing? It seems this was an Automagic feature in v61, but now needs manual configuration in v72, but the way it is achieved in v61 isn't explained.

I can't find any settings in the v61 firmware to copy over to my phone running v72 to get the BLF pickup feature to work.

I also tried enabling Visual Alert for BLF pickup. Whilst this feature does display the other Extension's number and incoming caller ID, the call still can't be picked up.

If there's no way to get this working, I will have to stick with the v61 firmware for now.
02-20-2014 09:07 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Call pickup on BLF not working on 7.72.0.1 - temp0001 - 02-20-2014 09:07 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Call forwarding with SIP devices Yealink and Cisco Call Manager CUCM joao.schlemm 8 28,151 12-27-2023 06:49 PM
Last Post: nolto
  T28P foward call doesn´t work with 2.73.0.50 Tato 4 13,277 09-14-2020 03:49 PM
Last Post: complex1
  default username/password not working after firmware upgrade tfrohling 3 39,972 02-15-2020 01:30 PM
Last Post: khalidnisar
  Attended transfer not working T29G chysky@slany.cz 1 7,224 02-11-2020 02:48 PM
Last Post: chysky@slany.cz
  T21P backlight not working after F/W update donb 0 5,180 11-07-2019 02:29 PM
Last Post: donb
  T22P Action URI ATrans and BTrans not working? DaveThompson 2 13,339 09-10-2019 10:47 AM
Last Post: DaveThompson
  Yealink T27G Not Working With 802.1x Auth After 3cx v14 to v15.5 Upgrade KM Tire IT Support 1 7,983 10-18-2018 05:06 PM
Last Post: KM Tire IT Support
Photo Yealink T21P E2 displays VIA and FROM headers on incoming call DmitryTsyganov 1 8,075 07-12-2018 07:28 PM
Last Post: johnkiniston
  T21P-E2 sends a CANCEL to put a call in hold Diego Juan 0 5,447 03-23-2018 02:52 PM
Last Post: Diego Juan
  Call Queue not working with the Grandstream UCM6202 ttran 8 25,099 03-04-2018 06:42 PM
Last Post: Adnanka

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication