[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Poll: Whether to cancel annotations in CFG files
This poll is closed.
Yes.We can refer annotations in the auto privisioning guide 0% 0 0%
No. It is not convenient at all.Please add annotations in the CFG files 100.00% 3 100.00%
Any other advice. 0% 0 0%
Total 3 votes 100%
* You voted for this item. [Show Results]

Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
【Advice & Suggestions】Whether to cancel annotations in CFG
Author Message
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #1
Exclamation 【Advice & Suggestions】Whether to cancel annotations in CFG
Hi all,

I make a survey about whether to cancel annotations in CFG.

[NOTE]
For example,
In version 71, CFG files contain below annotations which start as #:

-----------------------------------------------------
################################################################################​#######
## VLAN ##
################################################################################​#######
network.vlan.internet_port_enable = 0

#Configure the VLAN ID, it ranges from 1 to 4094, the default value is 1.
#Require reboot;
network.vlan.internet_port_vid =

#Configure the VLAN priority, it ranges from 0 (default) to 7.
#Require reboot;
network.vlan.internet_port_priority =

#Enable or disable the VLAN of PC port; 0-Disabled (default), 1-Enabled;
#Require reboot;
network.vlan.pc_port_enable =

#Configure the VLAN ID, it ranges from 1 to 4094, the default value is 1.
#Require reboot;
network.vlan.pc_port_vid =

#Configure the VLAN priority, it ranges from 0 (default) to 7.
#Require reboot;
network.vlan.pc_port_priority =

#Enable or disable the DHCP to obtain the information of the VLAN; 0-Disabled; 1-Enabled (default);
#Require reboot;
network.vlan.dhcp_enable =

#Configure the DHCP option to obtain the information of the VLAN. It ranges from 0 to 255.
#Multiple options separated by a comma. It supports up to 5 options in all.
#Require reboot;
network.vlan.dhcp_option =
------------------------------------------------------------

We are checking and systemizing our CFG files to one unify template named version 72, which will cancel annotations in CFG files.

-----------------------------------------------------------
################################################################################​#######
## VLAN ##
################################################################################​#######
network.vlan.internet_port_enable =
network.vlan.internet_port_vid =
network.vlan.internet_port_priority =
network.vlan.pc_port_enable =
network.vlan.pc_port_vid =
network.vlan.pc_port_priority =
network.vlan.dhcp_enable =
network.vlan.dhcp_option =
---------------------------------------------------------
And you need to refer to auto provisioning guide for annotations.

Our product department will check the survey and make the final decision.
To cancel annotations? To keep it as the same as version 71?

Now please don't hesitate to vote or advise!! Smile
Thanks in advance for you kindly advice.Smile


Best Regards
Yealink Support
(This post was last modified: 12-18-2013 09:59 AM by Yealink Support.)
12-18-2013 09:29 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
【Advice & Suggestions】Whether to cancel annotations in CFG - Yealink Support - 12-18-2013 09:29 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication