New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Two phones answer when one phone answers
Author Message
jholcombe Offline
Junior Member
**

Posts: 22
Joined: Jul 2014
Reputation: 0
Post: #1
Two phones answer when one phone answers
Two extensions 721 and 722 are members of "Ring All" ring group 951. Two virtual extensions 90001 and 90002 in a Patton PSTN gateway are set to connect inbound calls to ring group 951. Custom parameter ALLOWUSEBUSYOPTFORGROUP is set to 1, because the phones need to ring even if the the secretary is already on a call.

Last night I upgraded from 3CX 12.5 to 14. In the process I also upgrade the firmware on all of our Yealink T46G phones to the included 28.73.0.50 firmware.

Now if both virtual extensions 90001 and 90002 have an inbound call and the secretary on xt 721 answers a call, extension 722 also answers the same call on speakerphone, even if no-one is sitting at the desk for xt 722. It is essentially a 3-way call between the inbound caller, xt 721, and xt 722. What would cause 722 to answer the call? 722 answers the call at the exact same time that 721 does. Both phones stop ringing at that point, even though there is still another inbound caller on the other line, and ALLOWUSEBUSYOPTFORGROUP is set to 1. I don't believe we had this problem until after upgrading to 3CX v 14 and upgrading the firmware on the T46G phones.

I'm not sure if it's a 3CX issue, a Yealink issue, or both. I looked over the 3CX logs and I can't find anything obvious, but if anyone else wants to look them over please be my guest! I really need to get this resolved quickly as a deadline (for me) is approaching to have this functional and, for the most part, bug free. The log below is grouped by call #.

06-Oct-2015 19:47:01.313 Leg L:74.1[Line:90002<<anonymous] is terminated: Cause: BYE from PBX
06-Oct-2015 19:47:01.313 [CM503008]: Call(C:74): Call is terminated
06-Oct-2015 19:47:01.309 Leg L:74.3[Extn:721] is terminated: Cause: BYE from 10.102.100.8:5062
06-Oct-2015 19:46:48.846 Leg L:74.2[Extn:722] is terminated: Cause: 487 Request Terminated/INVITE from 10.102.100.9:5062
06-Oct-2015 19:46:48.844 [CM503003]: Call(C:74): Call to <sip:722@10.102.10.1:5060> has failed; Cause: 487 Request Terminated/INVITE from 10.102.100.9:5062
06-Oct-2015 19:46:48.731 [CM503007]: Call(C:74): Extn:721 has joined, contact <sip:721@10.102.100.8:5062>
06-Oct-2015 19:46:48.730 [CM503007]: Call(C:74): Line:90002<<anonymous has joined, contact <sip:90002@10.102.70.1:5061>
06-Oct-2015 19:46:48.728 L:74.3[Extn:721] has joined to L:74.1[Line:90002<<anonymous]
06-Oct-2015 19:46:16.551 [CM503025]: Call(C:74): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:74.1[Line:90002<<anonymous]
06-Oct-2015 19:46:16.547 [CM503025]: Call(C:74): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:74.1[Line:90002<<anonymous]
06-Oct-2015 19:46:16.501 [CM503027]: Call(C:74): From: Line:90002<<anonymous (<sip:anonymous@3cx.somewhere.gov:5060>) to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:46:16.501 [CM503004]: Call(C:74): Route 1: from L:74.1[Line:90002<<anonymous] to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:46:16.500 [CM503001]: Call(C:74): Incoming call from Line:90002<<anonymous to <sip:951@10.102.10.1:5060>

06-Oct-2015 19:47:03.645 Leg L:75.1[Line:90001<<anonymous] is terminated: Cause: BYE from PBX
06-Oct-2015 19:47:03.644 [CM503008]: Call(C:75): Call is terminated
06-Oct-2015 19:47:03.640 Leg L:75.2[Extn:722] is terminated: Cause: BYE from 10.102.100.9:5062
06-Oct-2015 19:46:49.837 Leg L:75.3[Extn:721] is terminated: Cause: 487 Request Terminated/INVITE from 10.102.100.8:5062
06-Oct-2015 19:46:49.835 [CM503003]: Call(C:75): Call to <sip:721@10.102.10.1:5060> has failed; Cause: 487 Request Terminated/INVITE from 10.102.100.8:5062
06-Oct-2015 19:46:49.715 [CM503007]: Call(C:75): Extn:722 has joined, contact <sip:722@10.102.100.9:5062>
06-Oct-2015 19:46:49.713 [CM503007]: Call(C:75): Line:90001<<anonymous has joined, contact <sip:90001@10.102.70.1:5060>
06-Oct-2015 19:46:49.711 L:75.2[Extn:722] has joined to L:75.1[Line:90001<<anonymous]
06-Oct-2015 19:46:45.575 [CM503025]: Call(C:75): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:75.1[Line:90001<<anonymous]
06-Oct-2015 19:46:45.571 [CM503025]: Call(C:75): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:75.1[Line:90001<<anonymous]
06-Oct-2015 19:46:45.526 [CM503027]: Call(C:75): From: Line:90001<<anonymous (<sip:anonymous@3cx.somewhere.gov:5060>) to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:46:45.526 [CM503004]: Call(C:75): Route 1: from L:75.1[Line:90001<<anonymous] to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:46:45.524 [CM503001]: Call(C:75): Incoming call from Line:90001<<anonymous to <sip:951@10.102.10.1:5060>

06-Oct-2015 19:48:16.786 Leg L:76.3[Extn:721] is terminated: Cause: BYE from PBX
06-Oct-2015 19:48:16.785 [CM503008]: Call(C:76): Call is terminated
06-Oct-2015 19:48:16.782 Leg L:76.1[Line:90001<<anonymous] is terminated: Cause: BYE from 10.102.70.1:5060
06-Oct-2015 19:47:33.099 Leg L:76.2[Extn:722] is terminated: Cause: 487 Request Terminated/INVITE from 10.102.100.9:5062
06-Oct-2015 19:47:33.098 [CM503003]: Call(C:76): Call to <sip:722@10.102.10.1:5060> has failed; Cause: 487 Request Terminated/INVITE from 10.102.100.9:5062
06-Oct-2015 19:47:33.076 [CM503007]: Call(C:76): Extn:721 has joined, contact <sip:721@10.102.100.8:5062>
06-Oct-2015 19:47:33.075 [CM503007]: Call(C:76): Line:90001<<anonymous has joined, contact <sip:90001@10.102.70.1:5060>
06-Oct-2015 19:47:33.072 L:76.3[Extn:721] has joined to L:76.1[Line:90001<<anonymous]
06-Oct-2015 19:47:27.522 [CM503025]: Call(C:76): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:76.1[Line:90001<<anonymous]
06-Oct-2015 19:47:27.518 [CM503025]: Call(C:76): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:76.1[Line:90001<<anonymous]
06-Oct-2015 19:47:27.473 [CM503027]: Call(C:76): From: Line:90001<<anonymous (<sip:anonymous@3cx.somewhere.gov:5060>) to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:47:27.473 [CM503004]: Call(C:76): Route 1: from L:76.1[Line:90001<<anonymous] to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:47:27.471 [CM503001]: Call(C:76): Incoming call from Line:90001<<anonymous to <sip:951@10.102.10.1:5060>

06-Oct-2015 19:48:20.486 Leg L:77.1[Line:90002<<anonymous] is terminated: Cause: BYE from PBX
06-Oct-2015 19:48:20.486 [CM503008]: Call(C:77): Call is terminated
06-Oct-2015 19:48:20.485 Leg L:77.3[Extn:721] is terminated: Cause: BYE from 10.102.100.8:5062
06-Oct-2015 19:48:01.458 Leg L:77.2[Extn:722] is terminated: Cause: 487 Request Terminated/INVITE from 10.102.100.9:5062
06-Oct-2015 19:48:01.457 [CM503003]: Call(C:77): Call to <sip:722@10.102.10.1:5060> has failed; Cause: 487 Request Terminated/INVITE from 10.102.100.9:5062
06-Oct-2015 19:48:01.346 [CM503007]: Call(C:77): Extn:721 has joined, contact <sip:721@10.102.100.8:5062>
06-Oct-2015 19:48:01.346 [CM503007]: Call(C:77): Line:90002<<anonymous has joined, contact <sip:90002@10.102.70.1:5061>
06-Oct-2015 19:48:01.344 L:77.3[Extn:721] has joined to L:77.1[Line:90002<<anonymous]
06-Oct-2015 19:47:46.530 [CM503025]: Call(C:77): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:77.1[Line:90002<<anonymous]
06-Oct-2015 19:47:46.527 [CM503025]: Call(C:77): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:77.1[Line:90002<<anonymous]
06-Oct-2015 19:47:46.482 [CM503027]: Call(C:77): From: Line:90002<<anonymous (<sip:anonymous@3cx.somewhere.gov:5060>) to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:47:46.482 [CM503004]: Call(C:77): Route 1: from L:77.1[Line:90002<<anonymous] to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:47:46.480 [CM503001]: Call(C:77): Incoming call from Line:90002<<anonymous to <sip:951@10.102.10.1:5060>


Any help or advice is greatly appreciated. Thank you!,

--John
10-07-2015 02:44 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Two phones answer when one phone answers - jholcombe - 10-07-2015 02:44 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Slow response when user presses buttons means phone number enters incorrectly chris.stewart 0 21 09-12-2019 12:27 PM
Last Post: chris.stewart
  COM-DEX compatible Bluetooth phone fizzypop 1 68 08-28-2019 02:39 PM
Last Post: jolouis
  COM-DEX compatible Bluetooth phone fizzypop 0 31 08-28-2019 02:31 PM
Last Post: fizzypop
  Disable line x while phone is set to DND IT-Risch_Support 3 165 08-07-2019 02:00 PM
Last Post: jolouis
  Long range cordless phones Fraukas2 3 329 07-13-2019 02:42 AM
Last Post: Kevin_Yealink
  T42G latest fw phone web interface invalid password clevoip 2 1,054 06-03-2019 03:03 PM
Last Post: Dario
  Phones Web UI Not Working after Firmware Update Rockses 0 398 04-09-2019 01:24 PM
Last Post: Rockses
Question Hide Call History on Yealink IP Phones wizardwebsolutions 5 1,367 04-04-2019 09:58 AM
Last Post: Marie7
  T42S phone not allowing to change default admin password? SysAdmin-Edgar 1 532 03-15-2019 01:46 PM
Last Post: complex1
  Different users on the same phone on SIP-T27G econnet 2 909 01-02-2019 01:46 PM
Last Post: jolouis

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication