Auto Provision firmware on W60B base station

[complex1]

(02-10-2023 06:58 PM)hospitale Wrote:  

(02-10-2023 06:24 PM)complex1 Wrote:  

(02-10-2023 05:04 AM)hospitale Wrote:  Hi!

I have an issue with firmware upgrades of W60B. The link in the per MAC config file is somehow ignored by the base station. It is currently running the 77.83.0.85 firmware version.

This does not work, the base station is not upgrading:

Code:

static.firmware.url = http://192.168.3.3:84/yealink/2/W60B-77.85.0.25.rom

It looks like the static.firmware.url is either not accepted by the phone or is overwritten by some other configuration as it does not show up in the config exported from the base station GUI after provisioning.

I managed to get the firmware updates for the handsets working:

Code:

over_the_air.url.w53h = http://192.168.3.3:84/yealink/2/W53Handset.rom
over_the_air.url.w56h = http://192.168.3.3:84/yealink/2/W56Handset.rom

On T41S we use a different parameter, which also works:

Code:

firmware.url = http://192.168.3.3:84/yealink/1/t41s.rom

Thanks for any suggestions.

Hi,

It looks like you have made a typo in the name of the firmware file...
Try this URL to upgrade the W60B base station:

Code:

static.firmware.url = http://192.168.3.3:84/yealink/2/W600-77.85.0.25.rom

Hi!

Thanks for the reply. The file name is correct. I can access it with a browser. I have also tried renaming it to w60b.rom, with the same results - the base has done nothing, and it was possible to access the firmware file.

Hi,

What you can try is to upgrade the base station manually with the .rom file.
Go to Settings > Upgrade > Select And Upgrade Firmware: and click "Browse..."
Then search for the file and click "Upload"