Auto Provision firmware on W60B base station

[hospitale]

Hi!

I have an issue with firmware upgrades of W60B. The link in the per MAC config file is somehow ignored by the base station. It is currently running the 77.83.0.85 firmware version.

This does not work, the base station is not upgrading:

Code:

static.firmware.url = http://192.168.3.3:84/yealink/2/W60B-77.85.0.25.rom

It looks like the static.firmware.url is either not accepted by the phone or is overwritten by some other configuration as it does not show up in the config exported from the base station GUI after provisioning.

I managed to get the firmware updates for the handsets working:

Code:

over_the_air.url.w53h = http://192.168.3.3:84/yealink/2/W53Handset.rom
over_the_air.url.w56h = http://192.168.3.3:84/yealink/2/W56Handset.rom

On T41S we use a different parameter, which also works:

Code:

firmware.url = http://192.168.3.3:84/yealink/1/t41s.rom

Thanks for any suggestions.