I can not get phones to provision in the Yealink Device Management.
DHCP option 66 is configured correctly as "https://10.61.0.10:28443/dm.cfg"
My T48G with latest firmware: 35.8.1.80 will not connect to the server
I have installed CentOS on a fresh VM and then installed the Yealink Device Manager as root using the instructions here:
http://forum.yealink.com/forum/announcements.php?aid=19
I noticed that during install, the config database section has an error.
.//base_install.sh: line 203: mysql: command not found
error: 'Access denied for user 'root'@'localhost' (using password: NO)'
Code:
sudo ./install.sh install 10.61.0.10
.//base_install.sh: line 203: mysql: command not found
=========================================================
start Device Server Install.
=========================================================
=========================================================
stop all Device Manager first
=========================================================
stop all device manager service
systemctl stop tcp-server begin
systemctl stop tcp-server end
systemctl stop tomcat_dm begin
systemctl stop tomcat_dm end
systemctl stop redis begin
systemctl stop redis end
systemctl stop mariadb begin
systemctl stop mariadb end
systemctl stop rabbitmq-server begin
systemctl stop rabbitmq-server end
disable all device manager service
systemctl disable rabbitmq-server begin
Removed symlink /etc/systemd/system/multi-user.target.wants/rabbitmq-server.service.
systemctl disable rabbitmq-server end
systemctl disable mariadb begin
Removed symlink /etc/systemd/system/multi-user.target.wants/mariadb.service.
systemctl disable mariadb end
systemctl disable redis begin
Removed symlink /etc/systemd/system/multi-user.target.wants/redis.service.
systemctl disable redis end
systemctl disable tomcat_dm begin
Removed symlink /etc/systemd/system/multi-user.target.wants/tomcat_dm.service.
systemctl disable tomcat_dm end
systemctl disable tcp-server begin
Removed symlink /etc/systemd/system/multi-user.target.wants/tcp-server.service.
systemctl disable tcp-server end
Loaded plugins: fastestmirror
Resolving Dependencies
--> Running transaction check
---> Package rabbitmq-server.noarch 0:3.7.4-1.el7 will be erased
--> Finished Dependency Resolution
Dependencies Resolved
=============================================================================================================================================================================================================================================================================================================================
Package Arch Version Repository Size
=============================================================================================================================================================================================================================================================================================================================
Removing:
rabbitmq-server noarch 3.7.4-1.el7 installed 13 M
Transaction Summary
=============================================================================================================================================================================================================================================================================================================================
Remove 1 Package
Installed size: 13 M
Downloading packages:
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Erasing : rabbitmq-server-3.7.4-1.el7.noarch 1/1
Verifying : rabbitmq-server-3.7.4-1.el7.noarch 1/1
Removed:
rabbitmq-server.noarch 0:3.7.4-1.el7
Complete!
Loaded plugins: fastestmirror
Resolving Dependencies
--> Running transaction check
---> Package erlang.x86_64 0:20.3-1.el7.centos will be erased
--> Finished Dependency Resolution
Dependencies Resolved
=============================================================================================================================================================================================================================================================================================================================
Package Arch Version Repository Size
=============================================================================================================================================================================================================================================================================================================================
Removing:
erlang x86_64 20.3-1.el7.centos installed 31 M
Transaction Summary
=============================================================================================================================================================================================================================================================================================================================
Remove 1 Package
Installed size: 31 M
Downloading packages:
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Erasing : erlang-20.3-1.el7.centos.x86_64 1/1
Verifying : erlang-20.3-1.el7.centos.x86_64 1/1
Removed:
erlang.x86_64 0:20.3-1.el7.centos
Complete!
[root@ydm dm_install]# clear
[root@ydm dm_install]# ./install.sh install 10.61.0.10
.//base_install.sh: line 203: mysql: command not found
=========================================================
start Device Server Install.
=========================================================
=========================================================
stop all Device Manager first
=========================================================
stop all device manager service
systemctl stop tcp-server begin
systemctl stop tcp-server end
systemctl stop tomcat_dm begin
systemctl stop tomcat_dm end
systemctl stop redis begin
systemctl stop redis end
systemctl stop mariadb begin
systemctl stop mariadb end
systemctl stop rabbitmq-server begin
Failed to stop rabbitmq-server.service: Access denied
See system logs and 'systemctl status rabbitmq-server.service' for details.
Failed to get load state of rabbitmq-server.service: Access denied
systemctl stop rabbitmq-server end
systemctl stop firewalld beging
systemctl stop firewalld end
kill all device manager service
Failed to stop rabbitmq-server.service: Access denied
See system logs and 'systemctl status rabbitmq-server.service' for details.
Failed to get load state of rabbitmq-server.service: Access denied
kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec]
kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec]
kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec]
kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec]
kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec]
/core/ dirctory exit
/var/log/yealink// dirctory not exit,create it
/var/log/yealink/common/ dirctory not exit,create it
/var/log/yealink/dm/ dirctory not exit,create it
/var/log/yealink/dm//tomcat_dm/ dirctory not exit,create it
/var/log/yealink/common//redis/ dirctory not exit,create it
/var/log/yealink/common//mariadb/ dirctory not exit,create it
/usr/local/yealink/ dirctory not exit,create it
/usr/local/yealink/common/ dirctory not exit,create it
/usr/local/yealink/dm/ dirctory not exit,create it
=========================================================
Install Erlang
=========================================================
Loaded plugins: fastestmirror
Examining /usr/local/yealink/common//rabbitmq/erlang-20.3-1.el7.centos.x86_64.rpm: erlang-20.3-1.el7.centos.x86_64
Marking /usr/local/yealink/common//rabbitmq/erlang-20.3-1.el7.centos.x86_64.rpm to be installed
Resolving Dependencies
--> Running transaction check
---> Package erlang.x86_64 0:20.3-1.el7.centos will be installed
--> Finished Dependency Resolution
Dependencies Resolved
=============================================================================================================================================================================================================================================================================================================================
Package Arch Version Repository Size
=============================================================================================================================================================================================================================================================================================================================
Installing:
erlang x86_64 20.3-1.el7.centos /erlang-20.3-1.el7.centos.x86_64 31 M
Transaction Summary
=============================================================================================================================================================================================================================================================================================================================
Install 1 Package
Total size: 31 M
Installed size: 31 M
Downloading packages:
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : erlang-20.3-1.el7.centos.x86_64 1/1
Verifying : erlang-20.3-1.el7.centos.x86_64 1/1
Installed:
erlang.x86_64 0:20.3-1.el7.centos
Complete!
=========================================================
Install Rabbitmq
=========================================================
Loaded plugins: fastestmirror
Examining /usr/local/yealink/common//rabbitmq/rabbitmq-server-3.7.4-1.el7.noarch.rpm: rabbitmq-server-3.7.4-1.el7.noarch
Marking /usr/local/yealink/common//rabbitmq/rabbitmq-server-3.7.4-1.el7.noarch.rpm to be installed
Resolving Dependencies
--> Running transaction check
---> Package rabbitmq-server.noarch 0:3.7.4-1.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
=============================================================================================================================================================================================================================================================================================================================
Package Arch Version Repository Size
=============================================================================================================================================================================================================================================================================================================================
Installing:
rabbitmq-server noarch 3.7.4-1.el7 /rabbitmq-server-3.7.4-1.el7.noarch 13 M
Transaction Summary
=============================================================================================================================================================================================================================================================================================================================
Install 1 Package
Total size: 13 M
Installed size: 13 M
Downloading packages:
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : rabbitmq-server-3.7.4-1.el7.noarch 1/1
Verifying : rabbitmq-server-3.7.4-1.el7.noarch 1/1
Installed:
rabbitmq-server.noarch 0:3.7.4-1.el7
Complete!
=========================================================
Install JDK
=========================================================
=========================================================
Install Tcp-server
=========================================================
=========================================================
Install MariaDB
=========================================================
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirror.sfo12.us.leaseweb.net
* extras: mirror.tocici.com
* updates: centos.s.uw.edu
Package libaio-0.3.109-13.el7.x86_64 already installed and latest version
Nothing to do
=========================================================
Install Redis
=========================================================
=========================================================
Install WEB Server
=========================================================
=========================================================
WEB context
=========================================================
=========================================================
Setup Environment
=========================================================
groupadd: group 'mysql' already exists
useradd: user 'mysql' already exists
Installing MariaDB/MySQL system tables in '/usr/local/yealink/common/mariadb/data' ...
OK
To start mysqld at boot time you have to copy
support-files/mysql.server to the right place for your system
PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER !
To do so, start the server, then issue the following commands:
'./bin/mysqladmin' -u root password 'new-password'
'./bin/mysqladmin' -u root -h ydm.dragonfireservices.net password 'new-password'
Alternatively you can run:
'./bin/mysql_secure_installation'
which will also give you the option of removing the test
databases and anonymous user created by default. This is
strongly recommended for production servers.
See the MariaDB Knowledgebase at http://mariadb.com/kb or the
MySQL manual for more instructions.
You can start the MariaDB daemon with:
cd '.' ; ./bin/mysqld_safe --datadir='/usr/local/yealink/common/mariadb/data'
You can test the MariaDB daemon with mysql-test-run.pl
cd './mysql-test' ; perl mysql-test-run.pl
Please report any problems at http://mariadb.org/jira
The latest information about MariaDB is available at http://mariadb.org/.
You can find additional information about the MySQL part at:
http://dev.mysql.com
Consider joining MariaDB's strong and vibrant community:
https://mariadb.org/get-involved/
mkdir: cannot create directory ‘/var/lib/mysql’: File exists
=========================================================
Install systemd service
=========================================================
=========================================================
Install server version
=========================================================
=========================================================
start_service
=========================================================
systemctl start rabbitmq-server begin
systemctl start rabbitmq-server end
Adding user "yealink" ...
User "yealink" already exists
Setting tags for user "yealink" to [administrator] ...
Setting permissions for user "yealink" in vhost "/" ...
systemctl start mariadb begin
systemctl start mariadb end
systemctl start redis begin
systemctl start redis end
systemctl start tcp-server begin
systemctl start tcp-server end
=========================================================
enable_service
=========================================================
enable all device manager service
systemctl enable rabbitmq-server begin
Created symlink from /etc/systemd/system/multi-user.target.wants/rabbitmq-server.service to /usr/lib/systemd/system/rabbitmq-server.service.
systemctl enable rabbitmq-server end
systemctl enable mariadb begin
Created symlink from /etc/systemd/system/multi-user.target.wants/mariadb.service to /usr/lib/systemd/system/mariadb.service.
systemctl enable mariadb end
systemctl enable redis begin
Created symlink from /etc/systemd/system/multi-user.target.wants/redis.service to /usr/lib/systemd/system/redis.service.
systemctl enable redis end
systemctl enable tomcat_dm begin
Created symlink from /etc/systemd/system/multi-user.target.wants/tomcat_dm.service to /usr/lib/systemd/system/tomcat_dm.service.
systemctl enable tomcat_dm end
systemctl enable tcp-server begin
Created symlink from /etc/systemd/system/multi-user.target.wants/tcp-server.service to /usr/lib/systemd/system/tcp-server.service.
systemctl enable tcp-server end
=========================================================
Config databases
=========================================================
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: NO)'
systemctl start tomcat_dm begin
systemctl start tomcat_dm end
mv: cannot stat ‘/home/jonathan.martinez/dm_install/script/clear_cache.sh’: No such file or directory
=========================================================
Install Success!!!
=========================================================
Yealink Device Management issues 
