[Solved] Power LED indicator in power-saving mode

[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020

Thread Rating:

0 Votes - 0 Average
1
2
3
4
5

Threaded Mode \| Linear Mode [Solved] Power LED indicator in power-saving mode
Author	Message

complex1 Offline

3CX Adv. Cert. Engineer

Posts: 1,549

Joined: Jan 2014

Reputation: 48

Post: #4

RE: Power LED indicator in power-saving mode

(03-14-2018 02:18 AM)Werner1959 Wrote: Theese two parameters did work in v82.

@complex1: What do you mean now? Is the Firmware v83 buggy or is the admin manual (page 200) wrong? On page 200 there is described that it should work with "features.power_saving.power_led_flash.on_time = 0". Does it not work as described there? Or do I understand the Manual not correct?

I need flashing only on missed calls and new voice mails.

The manual on page 200 described these parameters how to set, so the power LED won’t flash during power-saving mode.
features.power_saving.power_led_flash.on_time = 0
features.power_saving.power_led_flash.off_time =/ 0
In v82 no problems, but in v83 these values don’t work and the power LED flashes if the phone is in power-saving mode.
Yes, I think this is a bug in v83.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.

03-14-2018 09:19 AM

« Next Oldest | Next Newest »

Messages In This Thread

[Solved] Power LED indicator in power-saving mode - complex1 - 03-13-2018, 07:11 PM

RE: Power LED indicator in power-saving mode - fire555 - 03-13-2018, 11:58 PM

RE: Power LED indicator in power-saving mode - Werner1959 - 03-14-2018, 02:18 AM

RE: Power LED indicator in power-saving mode - complex1 - 03-14-2018 09:19 AM

RE: Power LED indicator in power-saving mode - Who - 03-15-2018, 07:26 PM

RE: Power LED indicator in power-saving mode - Werner1959 - 03-14-2018, 07:44 PM

RE: Power LED indicator in power-saving mode - Aishion_Yealink - 03-20-2018, 01:30 AM

RE: Power LED indicator in power-saving mode - Werner1959 - 03-20-2018, 02:20 AM

RE: Power LED indicator in power-saving mode - Aishion_Yealink - 03-20-2018, 02:32 AM

RE: Power LED indicator in power-saving mode - khurford - 03-20-2018, 11:36 PM

RE: Power LED indicator in power-saving mode - Sanjay - 04-03-2018, 03:08 AM

RE: Power LED indicator in power-saving mode - Aishion_Yealink - 04-03-2018, 04:37 AM

RE: Power LED indicator in power-saving mode - Who - 04-24-2018, 08:34 PM

RE: Power LED indicator in power-saving mode - complex1 - 04-29-2018, 05:05 PM

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Toggle Power LED or update config via remote?	48design-cg	0	1,722	01-17-2023 05:32 PM Last Post: 48design-cg
	[SOLVED] OpenVPN not doing anything T42G V83	Danariel	5	18,958	03-27-2020 02:32 PM Last Post: jamesg224
	Recovery Mode	Challenger VoIP	1	12,197	12-02-2019 11:14 AM Last Post: Jacky_Yealink
	T46s : recovery mode doesn't works and phone doesn't boot	ITANCIA_Support_Quentin	0	5,250	04-09-2019 08:07 AM Last Post: ITANCIA_Support_Quentin
	Disable Power LED completely	mhcsoft	6	15,911	03-02-2019 07:08 PM Last Post: mhcsoft
	T48S used with power adapter AND POE	mrfokus	3	10,128	01-08-2019 01:51 PM Last Post: complex1
	Daylight Saving applied incorrectly	Graeme Fleming	10	22,035	12-25-2018 01:33 PM Last Post: Simons_Yealink
	T46G: Power LED always flashing when backlight is off	Artabanos	125	444,793	10-15-2018 03:55 PM Last Post: Who
	Solved - T46G - Firmware issues - 28.83.0.50	B-C	1	9,968	10-13-2018 09:33 AM Last Post: complex1
	T46S recovery mode doesn't upload .rom file, Always "Start Updating..."	andreas1984	1	10,478	08-27-2018 09:03 AM Last Post: LOIC

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Log in