redial with dial plan

[Leandro Freire]

(10-25-2017 01:58 AM)Klaus Wrote:  Hello,

For example with 0800(.), if you dial 080012345, phone will dial out 0080012345, and call log on phone LCD will show "0080012345", when you redial, phone will also dial out "0080012345".

No, this is just my problem, if I use the redial and call 0080012345, it will be processed by rule 2, and will dial 0001280012345, and with that the call is wrong.

(10-25-2017 01:58 AM)Klaus Wrote:  If you want phone dial out "080012345", please set another dial plan: prefix=00800(.), replace=0800$1, then it will be ok.

In this case I would be doing the dialplan of dialplan.

I do not think that's the way ..

Obrigado, desculpe pelo meu inglês do Google translator.

---

Maybe this configuration will solve my problem:

dialplan.digitmap.apply_to.history_dial

Description:
Enables or disables the digit map to be applied to the numbers (received calls or missed
calls) dialed from call log lists.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter “dialplan.digitmap.enable” or
“account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The value configured by the
parameter “account.X.dialplan.digitmap.apply_to.history_dial” takes precedence over that configured by this parameter.


But how to configure this parameter?

This setting was found on Phones_Administrator_Guide_V82_21 page 288.

http://download.support.yealink.com/down...V82_21.pdf