w52P auto provision

[Michael_Yealink]

hi Chris

thanks for you information

for this issue , have you try to configure RPS server URL together with user name and password and test again? it seems that the authorization is failed which caused the provision failed .

you can try configure below URL to your RPS account , server :

http://admin:admin@185.62.77.56/prov/

just replace the admin to the correct user name and password you use , then that would be OK for authorization .

please test and let me know if any update . if still not work , then it is advised to get the whole log file to us so that we can do some further analysis .

it is advised to use a wireshark tool to get the pcap file , for how to download the tool and use it , please refer to the link below :
http://forum.yealink.com/forum/showthread.php?tid=15529

for the syslog, please export it to server side , before phone reboot , you can refer to the guide download from below link :
http://forum.yealink.com/forum/showthread.php?tid=15529

for the config.bin file , please refer to the FAQ below :
http://forum.yealink.com/forum/showthread.php?tid=1319

after you collect all the three files, just send them to me ASAP

let me know if any question

TKS & BR

Michael