T28P & T38G: Speed Dial delay or pause between DTMF

[goseph]

This could be a SOLUTION when using Asterisk:
Here is code for an Asterisk-Application inside Askozia (Asterisk based PBX).

Code:

1,Answer()
n,Dial(SIP/333,,D(wwww#9)L(5000))
n,Hangup()

This uses the DIAL-Command: http://www.voip-info.org/wiki/view/Asterisk+cmd+Dial
Explanation: It will dial extension 333 (which could be a doorbell). It then waits 2 seconds (4 times w = 4 times 0.5 seconds). It will then send DTMF "#9". It will hangup after 5 seconds (5000ms).

Please edit into real asterisk-code and share here!
This could be it:

Code:

; DTMF_Sample_333
[DIALPLAN-APPLICATION-383207416556cd1d417069]
exten => _[0-9a-zA-Z*#]!,1,Dial(SIP/333,,D(wwww#9)L(5000))
exten => _[0-9a-zA-Z*#]!,n,Hangup()
exten => s,1,Dial(SIP/333,,D(wwww#9)L(5000))
exten => s,n,Hangup()

Hope this helps anybody! Please give feedback!