[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46 common.cfg and {MAC}.cfg files question
Author Message
DanH Offline
Junior Member
**

Posts: 10
Joined: Nov 2013
Reputation: 0
Post: #1
T46 common.cfg and {MAC}.cfg files question
Hello,

Is there a way to download the current configuration of a T46 phone into a CFG file? That way I could edit just that file and make it available on a TFTP server. Otherwise I have to manually edit the CFG files from scratch.

Another question: I can download (export) the current phone configuration at http://IP-of-phone/servlet?p=settings-config&q=load. However, this produces a .bin file with some binary content. What is the idea here? Is there a way to edit this file and re-import? I checked the content and it seems to contain some, but not all configuration lines that I would expect either in {mac}.cfg or common.cfg.

Yet another question: Basically, I'd like to adapt the MIC gain as mentioned here: http://forum.yealink.com/forum/showthread.php?tid=736. Unfortunately, this very important setting is not exposed in the Web frontend of the phone, which I think is strange...
Anyway, the downloaded default CFG files from the yealink.com site do not contain
voice.handfree_send =
voice.handset_send =
voice.headset_send =
I did also not find those config values in the T46 admin guide...
Any pointer is welcome...

Thanks

Dan
11-05-2013 12:25 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 24
Post: #2
RE: T46 common.cfg and {MAC}.cfg files question
Hi Dan,

1. Sorry. We don't have the tool to change configurations to cfg files now.
You just need to set the cfg template once and can save and use it for many phones.

2. Sorry, in considered to the audio quality, we disable adapting the MIC gain.
But i will submit your request to our product department again.
11-05-2013 05:24 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
DanH Offline
Junior Member
**

Posts: 10
Joined: Nov 2013
Reputation: 0
Post: #3
RE: T46 common.cfg and {MAC}.cfg files question
(11-05-2013 05:24 PM)Yealink Support Wrote:  Hi Dan,

1. Sorry. We don't have the tool to change configurations to cfg files now.
You just need to set the cfg template once and can save and use it for many phones.

2. Sorry, in considered to the audio quality, we disable adapting the MIC gain.
But i will submit your request to our product department again.

Thanks for your answer.
1 - I am used to Snom and Aastra. Snom is very convenient in that respect. You can save the current phone configuration in either XML or plain text format. Aastra phones can save their version of common.cfg and {mac}.cfg. I would whish this functionality for yealink phones as well. Snom and Aastra phones are much more easier to troubleshoot this way. I can export the config of two Snom or two Aastra phones in text format and just compare the files to find clues on possible configuration errors. While we are at it, Snom phones also show me a live logging on SIP traffic in the web frontend. And a perfect feature for remote troubleshooting related to user interaction is the possibility to show a phone display screendump in the web browser. With Aastra's I can at least log to a syslog server.
Anyway, I am still not understanding the export of .bin files. What are those for if I cannot edit them? I guess this is only for configuration backup? Perhaps I miss the point here..

2 - I just had to replace a (test) T-46 again with the old Aastra 55i they were using before. While the T-46 is appreciated a lot by this customer, the fact that they cannot change the MIC gain either on the phone or throughthe web interface, was a reason to stick longer with the old Aastra phones.

I use autoprovisioning on that site and basically it works fine with yealink. Things like MIC gain, however, is a individual setting which must be available to the phone user.

Dan
11-05-2013 06:01 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 24
Post: #4
RE: T46 common.cfg and {MAC}.cfg files question
Hi DanH,

The send voice settings have a great influence on the echo cancellation. Those settings have been tested and debugged in factory, so they are the value in factory in default.
11-06-2013 04:43 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T46S Recovery method and files adigit_Support 0 2,134 09-08-2021 10:11 PM
Last Post: adigit_Support
  T4xU series no support information or files Chris708 5 5,858 01-07-2021 10:29 PM
Last Post: rfmjohn
  Voice Quality issue - Question to PCAP DanH 6 13,055 10-12-2019 05:29 PM
Last Post: DanH
  T48G Recovery Files Needed gigaboy 3 7,617 01-23-2019 03:49 PM
Last Post: jolouis
  T42G recovery files needed Global Data Systems 0 3,629 11-12-2018 09:15 PM
Last Post: Global Data Systems
  T48G Incoming Transfer Ring Question mike366 1 4,587 08-23-2018 03:46 AM
Last Post: Jensen_Yealink
  T48.bin recovery files Barnabas 1 4,736 08-13-2018 06:24 PM
Last Post: johnkiniston
  T41P Recovery files Columbia 1 4,744 06-08-2018 09:13 AM
Last Post: Seven_Yealink
  T41P Recovery files Service_Voipro 3 9,681 04-30-2018 07:49 PM
Last Post: complex1
  Need T40G Recovery Files YOVU Cloud 1 4,678 04-20-2018 11:54 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication