[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Using a Trunk for OUTBOUND calls only
Author Message
TotallyVoip Offline
Junior Member
**

Posts: 2
Joined: Nov 2013
Reputation: 0
Post: #1
Using a Trunk for OUTBOUND calls only
T28P - Firmware Version 2.70.23.10

Is there a way of configuring the phone to be able to use an Account for outbound calls only?

Preferably without maintaining permanent registration to the server, so it only connects when a call is dialed ?

The Bria softphone (PC/Android/iPhone) and Android's own built in Voip setup allow this (Allow incoming calls = no), but I can't seem to see any way of doing this on the Yealink ?

Any pointers appreciated

Thanks, Richard
11-04-2013 07:16 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: Using a Trunk for OUTBOUND calls only
Hi TotallyVoip,

Our DECT phone has this feature and can assign the handset just can do outgoing calls.

"Preferably without maintaining permanent registration to the server, so it only connects when a call is dialed."
Just to use the ECO+ mode can perfectly meet your need.

if you want to add this feature to T28, you should contact with your distributor. They will help to push your request.
11-13-2013 04:25 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
TotallyVoip Offline
Junior Member
**

Posts: 2
Joined: Nov 2013
Reputation: 0
Post: #3
RE: Using a Trunk for OUTBOUND calls only
(11-13-2013 04:25 PM)Yealink Support Wrote:  Hi TotallyVoip,

Our DECT phone has this feature and can assign the handset just can do outgoing calls.

"Preferably without maintaining permanent registration to the server, so it only connects when a call is dialed."
Just to use the ECO+ mode can perfectly meet your need.

if you want to add this feature to T28, you should contact with your distributor. They will help to push your request.

Thanks, it's a shame there is no way of doing this.

For inbound calls, is there any way of showing during the ringing phase, the actual identity/trunk that the call is coming in on?
11-16-2013 12:14 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #4
RE: Using a Trunk for OUTBOUND calls only
Hi TotallyVoip,

Do you mean when a call coming in, the LCD of phone can display the caller location?
Why do you want to use this feature?
11-20-2013 05:29 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48S One Way Audio When Calls Are Put On Hold Or Transferred MJauja 1 295 03-09-2024 08:48 PM
Last Post: complex1
  Yealink T19 can not automatically hangup inbound calls giaopc94 0 1,634 08-01-2022 09:28 AM
Last Post: giaopc94
  Missed calls list... caller id.. outbound route pattern savi 0 1,855 06-05-2022 03:09 PM
Last Post: savi
  Limit maximum of active calls per phone elastalink 5 15,057 09-09-2021 03:52 AM
Last Post: kapetrosyan
  Display Caller Picture on internal calls via LDAP dawgness 6 22,294 03-07-2019 01:41 AM
Last Post: scubes
  Ring-beep on internal busy calls lupacexi 1 7,618 12-11-2017 02:47 AM
Last Post: Evan_Yealink
  Ring-beep on internal busy calls xptpa2020 2 9,213 03-10-2017 07:47 AM
Last Post: Klaus_Yealink
  BLF Trunk Monitor Elastix Ricardo111 1 6,404 12-30-2016 10:13 AM
Last Post: Jensen_Yealink
  Missed Calls messages after pickup and in queues Kamik 2 9,605 12-14-2016 07:05 PM
Last Post: nick.spannagel
  T46G eaches only incoming calls, no outgoing calls Ddorf 2 8,251 10-27-2016 12:46 AM
Last Post: anonymous1711612242218

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication