Reverse BLF Colors

[Andi482]

Hello,

we use blf-keys to activate or deactivate group memberships on our phones.

If the phone is not a member of the group, the button color is red, if it joins the group, the color changes to green.

This confuses most of our team, because "on" = red and "off" is green.

Is it possible to create an option, which reverses the blf colors for specified buttons (But not all buttons)?

Our Hardware:
Yealink T46G

[keffa]

It's possible to do this in the programming of the PBX if you use Asterisk but is extremely complicated.

You could try playing with the BLF type under FEATURES and then GENERAL INFORMATION to use an alternate lamp mode if this is a quicker solution. However this will affect all BLF lamps so probably not ideal.