[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SIP-T46G Upgrade from old Firmware
Author Message
soapee01 Offline
Junior Member
**

Posts: 16
Joined: Jul 2013
Reputation: 0
Post: #1
SIP-T46G Upgrade from old Firmware
Hi,

I'm just wanting to know if I can upgrade a T46G from 28.71.1.16 (v71) to 28.80.0.70 (v80) straight? In other words, do I need to upgrade to v72 first, then v73, and then finally v80, or can I skip v72 and v73?

Thanks,

James
10-02-2015 01:47 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
keffa Offline
Junior Member
**

Posts: 37
Joined: Sep 2015
Reputation: 1
Post: #2
RE: SIP-T46G Upgrade from old Firmware
I just did this with five new handsets I purchased for a client and they are working fine.

Sometimes, though it is very rare, firmware does have to be updated like this but most of the time, the latest firmware incorporates all the previous fixes and additions so it's not required. The reason that they maintain older firmwares is that sometimes when they fix something, it can break something else so this allows you to roll back as it where, just in case this becomes problematic.
10-02-2015 11:35 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
soapee01 Offline
Junior Member
**

Posts: 16
Joined: Jul 2013
Reputation: 0
Post: #3
RE: SIP-T46G Upgrade from old Firmware
keffa,

Had you already configured the phones prior to upgrade? That's my concern. These have been deployed for some time.

I haven't experienced this issue with yealink, but I have with other manufacturers. Hopefully yealink can answer?
10-02-2015 11:46 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
joshua@itstel.com Offline
Junior Member
**

Posts: 41
Joined: Jul 2014
Reputation: 0
Post: #4
RE: SIP-T46G Upgrade from old Firmware
Since upgrading to 28.80.0.70 my handsfree intercom no longer works. The phone just rings. I can't find where to fix this or what has changed. Anybody else have this issue?
10-06-2015 01:29 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
keffa Offline
Junior Member
**

Posts: 37
Joined: Sep 2015
Reputation: 1
Post: #5
RE: SIP-T46G Upgrade from old Firmware
(10-02-2015 11:46 PM)soapee01 Wrote:  keffa,

Had you already configured the phones prior to upgrade? That's my concern. These have been deployed for some time.

I haven't experienced this issue with yealink, but I have with other manufacturers. Hopefully yealink can answer?

Yes I had configured them. The phone settings where maintained throughout the firmware update.

However I always recommend factory resetting before the firmware update and factory resetting immediately after the firmware update as I have known customers to experience issues that this process quite often resolves.
10-06-2015 03:42 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Abe1048 Offline
We Love Yealink!!!
***

Posts: 87
Joined: Aug 2013
Reputation: 0
Post: #6
RE: SIP-T46G Upgrade from old Firmware
(10-06-2015 03:42 AM)keffa Wrote:  
(10-02-2015 11:46 PM)soapee01 Wrote:  keffa,

Had you already configured the phones prior to upgrade? That's my concern. These have been deployed for some time.

I haven't experienced this issue with yealink, but I have with other manufacturers. Hopefully yealink can answer?

Yes I had configured them. The phone settings where maintained throughout the firmware update.

However I always recommend factory resetting before the firmware update and factory resetting immediately after the firmware update as I have known customers to experience issues that this process quite often resolves.

I have seen the same, some issues happen after upgrading a firmware and it resolves after I reset the phone to factory default.

All the best,
Abe
10-21-2015 05:56 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  newest firmware for T4XS units causes bootup loop davedogmoore@gmail.com 0 507 01-21-2024 03:44 PM
Last Post: davedogmoore@gmail.com
  Need bin and rfs files SIP-T46G RobbyK 1 732 01-11-2024 11:26 PM
Last Post: complex1
  SIP-T46G Need firmware update instructions RobbyK 2 967 01-11-2024 10:52 PM
Last Post: RobbyK
  Firmware T42s Raimundo 1 1,341 11-23-2023 06:45 PM
Last Post: Darsh
  T46G recovery files evoip 1 1,368 10-10-2023 12:46 AM
Last Post: Yisroel_MongoTEL
  T41S FIRMWARE 66.9.0.80 vers 66.86.0.5 DANJEAN 1 1,797 08-23-2023 01:00 AM
Last Post: complex1
  Yealink SIP-T40P Firmware UnitedTech_Support 1 2,005 05-05-2023 08:07 PM
Last Post: complex1
  T46G Multiple EXT Port amandah 2 1,976 04-04-2023 01:06 AM
Last Post: Yisroel_MongoTEL
Photo T46G LED blinks when screen is off W 4 8,133 03-29-2023 05:36 AM
Last Post: matthewchubb
  T48U Custom Firmware Upgrade to Official Friendly 0 1,922 03-29-2023 01:20 AM
Last Post: Friendly

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication