[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G DSSKey Settings lost on power cycle
Author Message
KevenD Offline
Junior Member
**

Posts: 2
Joined: Sep 2015
Reputation: 0
Post: #1
T46G DSSKey Settings lost on power cycle
We just received our new T46G phones in the office and our users were quite happy to find the DSSKey setting on the phone's web interface to customize the softkeys on their phones. We've however noticed that once the phone is unplugged for any length of time that the customizations are immediately lost when the phone reboots.

The default that comes up is all 9 keys on the first page being the single extension number that each phone is assigned which is an extremely redundant setting.

How do we set these DSSKey settings to be maintained when the power cycles on the phones?
09-30-2015 01:33 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Michael Offline
Administrator
*******

Posts: 382
Joined: Jul 2015
Reputation: 2
Post: #2
RE: T46G DSSKey Settings lost on power cycle
hi

for this issue,

1. have you confirmed that if any auto provision is set to the DSS Key ?

if yes, i will change the value if the phone reboot , please delete the DSS Key configuration on the config file

2. upgrade to the newest firmware and reset to factory and test again , firmware download link :
http://support.yealink.com/attachmentDow...0.0.70.zip

3. when you reboot the phone , please disconnect the network cable and see if the DSS Key configuration is changed after it boot up ?
if no , then it is auto provision issue, refer to step 1

TKS & BR

Micahel
09-30-2015 06:03 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
KevenD Offline
Junior Member
**

Posts: 2
Joined: Sep 2015
Reputation: 0
Post: #3
RE: T46G DSSKey Settings lost on power cycle
(09-30-2015 06:03 AM)Yealink_Michael Wrote:  hi

for this issue,

1. have you confirmed that if any auto provision is set to the DSS Key ?

if yes, i will change the value if the phone reboot , please delete the DSS Key configuration on the config file

2. upgrade to the newest firmware and reset to factory and test again , firmware download link :
http://support.yealink.com/attachmentDow...0.0.70.zip

3. when you reboot the phone , please disconnect the network cable and see if the DSS Key configuration is changed after it boot up ?
if no , then it is auto provision issue, refer to step 1

TKS & BR

Micahel

I do believe that this was the solution - I just got off the phone with our VOIP provider (vonage business) about 10 minutes ago and their support agents had me remove the auto-provisioning and update the firmware. Only problem I have now is that with this new firmware the web based login seems to have implemented a higher security setting so I can't have my users auto-log in from a remote form anymore and will have to have them know usernames and passwords.. Tongue

Thanks for the reply .. you were on the right track for sure.
09-30-2015 06:07 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Need bin and rfs files SIP-T46G RobbyK 1 1,610 01-11-2024 11:26 PM
Last Post: complex1
  SIP-T46G Need firmware update instructions RobbyK 2 2,173 01-11-2024 10:52 PM
Last Post: RobbyK
  T46G recovery files evoip 1 2,331 10-10-2023 12:46 AM
Last Post: Yisroel_MongoTEL
  T46G Multiple EXT Port amandah 2 2,589 04-04-2023 01:06 AM
Last Post: Yisroel_MongoTEL
Photo T46G LED blinks when screen is off W 4 9,035 03-29-2023 05:36 AM
Last Post: matthewchubb
Information Toggle Power LED or update config via remote? 48design-cg 0 1,379 01-17-2023 05:32 PM
Last Post: 48design-cg
  T46G/S Multicast on PC Port Issue MiKeDaDoC 5 12,510 01-02-2023 01:30 AM
Last Post: kw160008
  T46G call completed elsewhere zimbocz 3 10,833 10-28-2022 03:28 AM
Last Post: tredd1982
  T46G SSL 2 & 3 Vulnerability russavd 0 1,747 09-24-2022 05:07 AM
Last Post: russavd
  T46G - shortcut to activate/ deactivate accounts? westats 4 6,551 07-07-2022 11:40 AM
Last Post: westats

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication