Click to dial via Dialectic

[Freek Mooij]

Hi,

Using Mac Book Pro and Dialectic http://www.jonn8.com/dialectic/ for click to dial.
Downloaded the script form their website to support Yaelink phones.
With installing I noticed the support for the models T1X , T2X and T3X.
I selected the T3X model, but the phone is not dialing out.

Enabled in the T-46G phone under Features, Remote control the feature Action URI allow IP List and filled in the ip address of my macbook pro (both wifi and ethernet adresses seperated by a comma).


I raised the question also @ Dialectic. I hope you can support them make this work.

Thanks Freek

[Yealink Support]

Hi Freek,
So which phone are you using now? T46G or T3XG?
And on different firmware, the action URI format is different.
For T3XG V70 firmware, the format is:
http://IP address of phone/cgi-bin/cgiServer.exx?key= variable value
For T46G V71 firmware, the format is:
http(s)://phone IP address/servlet?key=variable value

So please check, and try to fill "any" in the allow IP List.
Thanks.

[Freek Mooij]

(10-16-2013 10:34 AM)Yealink Support Wrote:  Hi Freek,
So which phone are you using now? T46G or T3XG?
And on different firmware, the action URI format is different.
For T3XG V70 firmware, the format is:
http://IP address of phone/cgi-bin/cgiServer.exx?key= variable value
For T46G V71 firmware, the format is:
http(s)://phone IP address/servlet?key=variable value

So please check, and try to fill "any" in the allow IP List.
Thanks.

I am using the model T-46G with firmware 28.71.0.170I have found another dial program whom supports dial out and also number recognition. e.g. you get a popup looked up the nr in my contacts on the MAC via the Action URL feature.
The program is called Phone Amego.

freek

[jmoore]

You should check out Tenfold. Their extension let's you click to dial on any webpage or even spreadsheets.

The website shows support for hosted pbx systems and desk phones like Polycom, Yealink and Cisco. Check it out at https://www.tenfold.com/integrations/yealink/