T22P PC Ethernet Port

[Greg]

Hello,
I'm trying to connect one pc on the secondary ethernet port present on the T22P. (with latest firmware 7.71.0.140)
The network card is 10/100/1000, but after the negotation it is connected at 10 Mb.
I'm using 1 meter patch cord. (not cross)
It's an issue, or something is wrong in my procedure?
Thanks for your help.
Greg

[ItsAll Good]

We are experiencing this as well. Went back to the previous V.70 firmware, and all is well.

[Yealink Support]

Hi all,
We are analyzing this issue now, any update will let you know ASAP.

[Yealink Support]

Hi all,
We fixed this issue in below firmware x.71.0.144, please have a try:
ftp://yealinkftp:yealinkftp@ftp.yealink....s/T2x/V71/
Thanks.

[ItsAll Good]

Thank you. That version fixed the PC port speed issue.

[robencc]

i am also facing same issue with latest v 7.72.0.30.
SO I WANT TO DOWNGRADE TO THIS VERSION.
so this ftp link asking username and password.
please help me out

[ivan.jakovsistem]

(03-11-2014 03:39 PM)robencc Wrote:  i am also facing same issue with latest v 7.72.0.30.
SO I WANT TO DOWNGRADE TO THIS VERSION.
so this ftp link asking username and password.
please help me out

Download it from here:
http://www.yealink.com/SupportDownloadfi...6&flag=142
I've just updated my phone and everything is working fine with FW version: 7.72.0.30