[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Pickup with BLF
Author Message
LPElocys Offline
Banned

Posts: 4
Joined: Sep 2015
Post: #1
Pickup with BLF
Hello,

On a T46G, is it possible to have on the same key BLF and Call Pickup ?

I see a call directed to my collegue because the BLF key is blinking. I want to pickup this call with a single key press on the BLF key. Or, I first press a "pickup key" then the blinking BLF key.
I have found no way to achieve this. How to do it ?

Regards,

Laurent
09-22-2015 03:18 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jcaruso Offline
Junior Member
**

Posts: 20
Joined: May 2013
Reputation: 0
Post: #2
RE: Pickup with BLF
Hi,

You can set a call prefix pickup code in the Extension field on the DSS Key > Line Key pages.

For example, on FreePBX you would use **
When the BLF key is flashing and you press it, it will prepend ** to the extension. For example, it would send **1000 to your PBX which interprets this as a pickup code.
09-22-2015 09:17 PM
Find all posts by this user    like1    dislike0 Quote this message in a reply
keffa Offline
Junior Member
**

Posts: 37
Joined: Sep 2015
Reputation: 1
Post: #3
RE: Pickup with BLF
Just to enhance jcaruso's answer a bit further, the phone has a setting to enable this as the default behaviour for BLF lamps.

In the phones settings go to the FEATURES tab. Then go to CALL PICKUP in the menu down the left.

You want to have these settings...

Directed call pickup: Enabled
Directed call pickup code: ** (Change this to your PBX code for remote pickup. On all asterisk based systems its **)

Then just enter your BLF key extension numbers as normal (Don't put the **) and the phone will default to picking up the call if the BLF key is pressed when flashing/ringing.
09-29-2015 06:19 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Directed or group pickup call history softnetvoip 1 2,210 03-08-2023 10:53 PM
Last Post: softnetvoip
  Visual Alert for BLF Pickup - brings up "unkown" P_Hackert 5 13,962 01-09-2023 11:34 PM
Last Post: MicF1968
Bug Visual Alert for BLF Pickup - limit to group only Maciejp 2 5,911 08-11-2021 01:40 PM
Last Post: Maciejp
  T41S pickup call with Swyxit qaztan 0 3,657 02-17-2020 04:39 PM
Last Post: qaztan
  Speed dial Key adds pickup code when it shouldn't chrischevy 1 5,561 12-10-2019 03:14 PM
Last Post: JaredBusch
  Pickup Bug in 66.84.0.15 rickstinson 1 4,794 05-24-2019 06:21 AM
Last Post: Mike_Yealink
  Pickup call does not work - HiPath Bernhard77 2 6,989 06-07-2018 12:09 PM
Last Post: Evan_Yealink
  Yealink T48 Cant pickup call from BLF support_voxia 5 15,013 08-18-2017 01:15 AM
Last Post: Asanka
  Voice delay on call pickup S J 2 9,037 05-08-2017 08:43 AM
Last Post: Kevin_Yealink
  Pickup of Park doesn't show CID joshua@itstel.com 5 12,871 02-22-2017 02:30 AM
Last Post: Karl_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication