[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Auto-answer via SIP-header
Author Message
mkeuter Offline
Asterisk Integrator
***

Posts: 82
Joined: Jul 2013
Reputation: 3
Post: #1
Auto-answer via SIP-header
Is an auto-answer feature via SIP-header for the W52P possible, similar to the T-2xP/T-3xP series?

like:
Code:
SIPAddHeader(Call-Info: <sip:pbx-ip>\;answer-after=0)

I ask because I want that to use for Click2Dial (CTI) application (routed over a special CTI context for security reasons of course). And also for paging.

Michael

http://www.mksolutions.info
(This post was last modified: 09-21-2013 07:12 PM by mkeuter.)
09-21-2013 07:10 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: Auto-answer via SIP-header
Hi Mkeuter,
W52P use the same SIP as T2/T3 series. So you can have a try "answer-after=0".
Thanks.
09-23-2013 02:13 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
mkeuter Offline
Asterisk Integrator
***

Posts: 82
Joined: Jul 2013
Reputation: 3
Post: #3
RE: Auto-answer via SIP-header
Thanks, good to know.

Update: after an upgrade to FW 25.30.0.40 it works fine now for me.

Michael

http://www.mksolutions.info
09-23-2013 11:58 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
sunstatetech Offline
Junior Member
**

Posts: 30
Joined: May 2013
Reputation: 1
Post: #4
RE: Auto-answer via SIP-header
Sorry to bring this thread back, but I figured it was better to keep all this info in one place instead of starting a new thread.

I am using this SIP TAPI:

http://www.ipcom.at/en/telephony/siptapi/

Everything works great, but I can't seem to get auto answer to work with a T46G (28.71.0.176). This SIP TAPI provider has two configuration options for auto answer:

[Image: r1EeFZP.png]

I have tried both options and neither works. I have taken a capture on the phone for each auto answer option, but I can't find Call-Info anywhere in the message header.

[Image: nMnpDdU.png]

Where should the Call-Info be? If it is not there, I'm guessing this means that the SIP TAPI isn't sending it, or that the PBX (3CX) is stripping it?

Thanks in advance.
04-01-2014 02:19 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #5
RE: Auto-answer via SIP-header
Call-info: answer-after=0 should be sent by PBX usually. You can refer to 3CX technical specialist for more details.
04-02-2014 04:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
mkeuter Offline
Asterisk Integrator
***

Posts: 82
Joined: Jul 2013
Reputation: 3
Post: #6
RE: Auto-answer via SIP-header
@sunstatetech

I use a special context "auto-answer" in Asterisk, where I add the SIP-header (and then dial the phone). Then I point the dialer application to the device e.g. "local/100@auto-answer" instead of "SIP/100". But interestingly it works for me for both snom and Yealink phones. No idea if this approach would work for 3CX as well …

Michael

http://www.mksolutions.info

Michael

http://www.mksolutions.info
(This post was last modified: 04-02-2014 11:02 PM by mkeuter.)
04-02-2014 11:00 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
anonymous1711612242218
Unregistered

 
Post: #7
RE: Auto-answer via SIP-header
Dear sunstatetech,
I'm using the siptapi 0.2.15 too.
Please select Polycom, SNOM-old, instead Siemens,SNOM-New
The first option works well with ALL Yealink models
Bye Walter
04-29-2014 12:08 AM
     Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W52P Sporadic behavior with auto answer csmith@ccexpert.net 2 13,106 09-27-2019 08:38 PM
Last Post: justingoldberg
  Auto intercom no longer works asinshesq 6 15,781 09-23-2019 01:47 PM
Last Post: Chris708
  Answer delay ictgreenfields 5 17,656 08-23-2016 12:39 AM
Last Post: manzaboy
  W52P handset does not answer paging digitalaroma 4 12,021 05-04-2015 01:57 AM
Last Post: digitalaroma
  Diversion header when the W52P forwards the call with 302 Moved temporarily darkstar 3 27,792 09-24-2014 01:27 AM
Last Post: darkstar
  Can't Auto Provision W52P stevez 10 33,988 10-10-2013 03:09 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication