[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
BLF on line keys
Author Message
jdackert Offline
Junior Member
**

Posts: 27
Joined: Apr 2013
Reputation: 0
Post: #1
BLF on line keys
T-28 is putting the BLF lines from the Broadworks BLF list on the open Line keys rather than the desired DSS keys.
I have one Line Account so with 6 lines in the BLF list, the 5 remaining line keys get a BLF line and the remaining BLF is on a DSS key.
The BLF lines don't show on the phone GUI Account x screens.
When I manually set each Phone>DSS Key>Memory Key with type "BLF List" and Line "Line1" and press Confirm, the screen reverts to only showing DSS Key 1 configure and there is no change on the phone.

Also, the Phone>DSS Key>Line Keys defaults to "BLF List" and "Line 1" and changes revert after Confirm.

I'd prefer a config file solution.


Thanks,
Jed
09-19-2013 05:45 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: BLF on line keys
Hi Jed,
You can disable this feature via auto provision parameter:
--------------------------------------------------
#Enables or disables the phone to automatically configure the BLF list keys.
#0-Disabled 1-Enabled The default value is 1.

phone_setting.auto_blf_list_enable = 0
--------------------------------------------------
Thanks.
09-24-2013 04:21 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jdackert Offline
Junior Member
**

Posts: 27
Joined: Apr 2013
Reputation: 0
Post: #3
RE: BLF on line keys
I set phone_setting.auto_blf_list_enable = 0 but it doesn't make any difference. When I add BLF in Broadworks the phone still puts them on the Line keys. I'm on v. 2.70.0.140 if that make any difference.
09-25-2013 03:17 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jdackert Offline
Junior Member
**

Posts: 27
Joined: Apr 2013
Reputation: 0
Post: #4
RE: BLF on line keys
I upgraded to 2.71.0.140 which stopped the Line key provisioning, but didn't provision the DSS keys.

phone_setting.auto_blf_list_enable = 1
phone_setting.blf_list_sequence_type = 1
features.pickup.blf_visual_enable = 1
features.pickup.blf_audio_enable = 0
account.1.blf.blf_list_uri = Yea-BLF
09-25-2013 08:01 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #5
RE: BLF on line keys
Hi Jdackert,
Please try below parameter and check again:
---------------------------------------------
bw.directory_enable = 1
phone_setting.auto_blf_list_enable = 1
phone_setting.blf_list_sequence_type = 1
features.pickup.blf_visual_enable = 1
features.pickup.blf_audio_enable = 0
account.1.blf.blf_list_uri = Yea-BLF
---------------------------------------------
In V71 firmware, you should enable broadsoft featues first(bw.directory_enable = 1).
Any test result please let us know, thanks.
09-25-2013 03:48 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jdackert Offline
Junior Member
**

Posts: 27
Joined: Apr 2013
Reputation: 0
Post: #6
RE: BLF on line keys
bw.directory_enable was it Thank you!
09-28-2013 01:54 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Unable to Answer call without pressing Line 1 TheKirbyGroup 0 646 11-03-2023 11:04 PM
Last Post: TheKirbyGroup
  Display 0 for line pickup SupportA 0 1,103 07-12-2023 08:51 PM
Last Post: SupportA
  wrong default line with DECT Handset cbergmann 1 1,954 01-06-2023 07:44 PM
Last Post: complex1
  Best way to manage line keys on multiple T48G/S sani390 0 3,422 07-01-2021 02:06 PM
Last Post: sani390
  Line LED on/off and color AndyM 0 4,253 07-07-2020 02:40 PM
Last Post: AndyM
Question Download config by command line sadzas 3 10,493 07-29-2019 06:02 AM
Last Post: Paz_Yealink
  Change standard outgoing line on T46G oestersund 1 6,492 12-15-2018 09:58 PM
Last Post: support2
  Using Push XML to configure DSS Keys Rob! 2 8,896 02-06-2018 03:11 AM
Last Post: Aishion_Yealink
  Enhanced DSS keys (EDK) rpenrod 7 15,954 11-21-2017 02:52 AM
Last Post: Lucia_Yealink
Question Yealink line Disabeling itself krishanm0866 0 5,126 10-07-2016 09:01 AM
Last Post: krishanm0866

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication