[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Name is missing in DHCP
Author Message
AusSupport Offline
Junior Member
**

Posts: 3
Joined: Sep 2013
Reputation: 0
Post: #1
Name is missing in DHCP
Hello,

Firmware Version 2.70.0.140
Hardware Version 1.0.0.39

In my T28P I have;

Internet Port Type DHCP
IP Address 192.168.1.80
Subnet Mask 255.255.255.0
MAC Address 00-15-65-3F-95-F2

... but in my ( multiple - TP-Link, pfSense, others when I test them ) routers I see;

4 Unknown 00:15:65:3F:95:F2 192.168.1.80

... and that 'Unknown' is a problem because I cannot tell which device this is unless I either set a permanent registration in DHCP or I ask all users what their IP Address is.

I did see a previous posting where a fix was supposed to be coming in the next .70 release but it didn't seem to make it into this one.

This is a bit of an administrative nightmare when you have lots of phones.
09-18-2013 09:41 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: Name is missing in DHCP
Hello,
Did you enable LLDP in the phone webpage-Network-Advanced?
The phone will send the name/IP address/Mac address... to switch or router.
You can see attached picture.
Thanks.


Attached File(s) Thumbnail(s)
   
09-23-2013 04:31 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
AusSupport Offline
Junior Member
**

Posts: 3
Joined: Sep 2013
Reputation: 0
Post: #3
RE: Name is missing in DHCP
Hello,

I have just checked and it is already enabled.........

I will look at a trace in Wireshark and check to if I see the same information you have provided.


Attached File(s) Thumbnail(s)
   
09-23-2013 05:26 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
AusSupport Offline
Junior Member
**

Posts: 3
Joined: Sep 2013
Reputation: 0
Post: #4
RE: Name is missing in DHCP
I just wanted to post that I have upgraded to 2.71.0.140 and without any changes to my infrastructure DHCP now correctly shows the name I have entered in Features / General Information / DHCP Hostname.

Thanks for your efforts at resolving this issue.
10-22-2013 05:26 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Missing Contact header in VQ RTCP XR messages (x.73.0.50) oliv 3 12,844 03-21-2017 01:35 PM
Last Post: Klaus_Yealink
  T28P phone - Vlan & LLDP dhcp option toxicfusion 1 8,874 01-05-2016 05:09 AM
Last Post: Karl_Yealink
  no DHCP Nick 0 4,816 07-15-2014 02:30 PM
Last Post: Nick
  T2x - No IPv6 DHCP GeorgSchwarz 3 9,901 05-04-2014 11:30 PM
Last Post: Yealink Support
  T26P firmware version 7.70.0.150 missing mjeraj1 3 14,608 12-02-2013 05:55 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication