T-4x Provisioning : linekey.x.pickup_value

[jonaskellens]

Hello,

I have the following in the configuration file :

linekey.4.line = 0
linekey.4.value = 10
linekey.4.pickup_value = **
linekey.4.type = 16
linekey.4.xml_phonebook =
linekey.4.label = 10

I notice however in the webinterface of my Yealink T-46G that for linekey 4 the field "Extension" is empty (in stead of holding the value '**').

How do I fill in the last field "Extension" of the line key via provisioning ??

[jfennell]

I just ran into this as well. For the 4XG series it looks like they changed the parameter name to extension.

So it would be

linekey.4.line = 0
linekey.4.value = 10
linekey.4.extension= **
linekey.4.type = 16
linekey.4.xml_phonebook =
linekey.4.label = 10

[Yealink Support]

Hello all,
As Jfennell mentioned, it should be "linekey.4.extension= **".
You can refer to the latest template from our website:
http://www.yealink.com/Upload/T4X/GA/Aut...ioning.zip
Thanks.

[anonymous1712222627012]

Dear Support,
pay attention, in your T41P download package,
http://www.yealink.com/Upload/T4X/T41/Au...g-T41P.zip
the common.cfg contains a mistake

################################################################################​#######
## Line Key ##
################################################################################​#######

#The x of the parameter "linekey.x.line" ranges from 1 to 15.
#The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1.
#linekey.x.lable--Define the label for each line key.

#Configure Line Key1
linekey.1.line =
linekey.1.value =
linekey.1.pickup_value =
linekey.1.type =
linekey.1.label =

I think this causes misunderstanding, as jonaskellens wrote

Regards Walter

[Yealink Support]

Hi Walter,

Thanks for the advice. We will update the package.

[JamesK]

This has not been done as I just downloaded the package and the common still has the error in it

[Yealink Support]

Hi JamesK,

Sorry. My colleague from Document Department will solve this issue.

[Yealink Support]

Hi all,

Sorry. We are arranging a unify clear template for all our phones and will release it in December on the schedule.
Can you wait for the new template?

[JamesK]

i just went in and manually made the changes. So for me it of little issue now.