[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
t26p don't transfer
Author Message
Malafaia Offline
Junior Member
**

Posts: 5
Joined: Aug 2013
Reputation: 0
Post: #1
t26p don't transfer
Hello.

I tried to transfer calls from a t26p and the call ends when I transfer, in this company we have t20p and t26p phones. Transference from the t20p works and from the t26p the call ends.

We are using the firmware 6.70.0.140, and the phones are auto provisioning.

I put the text "way" of the call attached.

Do someone can help me?

Sorry for the English mistakes.


Attached File(s)
.txt  HOMER_CID_1918916366@192.168.99.225.txt (Size: 50.26 KB / Downloads: 3)
(This post was last modified: 08-08-2013 03:01 AM by Malafaia.)
08-07-2013 08:51 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: t26p don't transfer
Hi Malafaia,
Could you let me know how do you make the transfer? Could you describe the steps one by one?
And please reset to factory default and try again.
Thanks.
08-08-2013 01:51 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Malafaia Offline
Junior Member
**

Posts: 5
Joined: Aug 2013
Reputation: 0
Post: #3
RE: t26p don't transfer
When I receive the call o answer the phone and then I press "TRAN".
I type the number I want to transfer to and press "OK".
I talk to the person normally and then o press "TRAN" again to transfer the call to the person.
The call doesn't go to the person.

I tried every modes of transfer (blind, with consultation and the other when we just listen the ring back and transfer) and it didn't works no way.

If you want, you can see the trace I attached in the first post.

Thanks
08-08-2013 08:21 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #4
RE: t26p don't transfer
Hi Malafaia,
It sounds strange, T20(with firmware 9.70.0.140) can transfer well, but T26 can't. Even you reset to factory the problem is still?
And all three transfer mode can't work?(Blind/Semi-attended/Attended transfer)
Could you provide PCAP trace, syslog(level 6) and config.bin file to us, so we can analyze?
Before you export the syslog, please set log level as 6, and reboot the phone, then click Start,and reproduce the issue, then click Stop,and export the trace, syslog, config,bin to us.
(About where to export these files, please refer to attached screenshot.)
These three files are very important for us, hope you can kindly understand.
Thanks.


Attached File(s) Thumbnail(s)
   
08-09-2013 01:53 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Malafaia Offline
Junior Member
**

Posts: 5
Joined: Aug 2013
Reputation: 0
Post: #5
RE: t26p don't transfer
Yes I reset to factory and it didn't worked.
I can't transfer any way.
I got two PCAP TRACES but both are very small. Is there a time limit or a size limit for this PCAP TRACE?
The config.bin is not allowed to be attached so I put the extension ".txt".
I hope you find the problem, because I tried and I couldn't find nothing wrong.

Thanks a lot.


Attached File(s)
.pcap  6.70.0.140_10-51-58.pcap (Size: 462.38 KB / Downloads: 2)
.tar  syslog.tar (Size: 9.5 KB / Downloads: 1)
.txt  config.txt (Size: 167.5 KB / Downloads: 1)
08-09-2013 10:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #6
RE: t26p don't transfer
Hi Malafaia,
I imported your config.bin file to my T26 with firmware 6.70.0.140, and all three transfer mode work well.
I found there's few information in your syslog.tar, did you set log level as 6, and reboot the phone? Could you try again? Because without one of these files, we can't analyze the issue.
"Before you export the syslog, please set log level as 6, and reboot the phone, then click Start,and reproduce the issue, then click Stop,and export the trace, syslog, config,bin to us."
Thanks.
08-10-2013 11:37 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Malafaia Offline
Junior Member
**

Posts: 5
Joined: Aug 2013
Reputation: 0
Post: #7
RE: t26p don't transfer
Sorry for the delay and I couldn't get the files yet.

The phone that doesn't work was in my client and I tested it in my network and it works normally.
Is there any difference between t20p and t26p when they are going to transfer the call?
I put sip t28p to test in my client and it was working, but mow its not, do you think can be something in the network?

Thanks in advance.
08-14-2013 11:37 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #8
RE: t26p don't transfer
Hi Malafaia,
The transfer is the same between T20P and T26P.
Last time, you said in your client side, T20P works well, while T26P doesn't work? And both of them have V70 firmware? (9.70.0.140 and 6.70.0.140)
Do T20p and T26p in the same network environment? If they are in the same environment, and the same V70 firmware, and also after reset to factory default, there shouldn't be have problem on T26p while T20p do not have problem.
If they are not in the same environment, maybe it will be the network problem.
08-15-2013 10:23 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ESSEF Offline
Junior Member
**

Posts: 1
Joined: Feb 2015
Reputation: 0
Post: #9
RE: t26p don't transfer
I have a similar problem since about a week: When someone tries to transfer a call to my phone (and also to one other phone of a colleague) they get the message 'Transfer Failed'.
We use 3CX for about two years without problems and the upgrade to version 12 was a few months ago. Since then nothing was changed.

I was suggested to upgrade the firmware of the phones to 6.71.1.1 but the strange thing is that the firmware upgrade runs without any errors but afterwards the firmware version remains 6.71.0.168. Any ideas?

Thanks in advance for your reply.

P.S.: All the phones (10) are Yealink T26P.
02-24-2015 11:23 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #10
RE: t26p don't transfer
Hi,

You can upgrade phone to latest firmware 6.73.0.40.
http://www.yealink.com/Upload/UCOne/2014...3.0.40.rar

You will need reset phone to clear old configuration after upgrading.(It means that you have to reconfigure phone)

Regards,
James
03-02-2015 10:17 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MP54 - 'Transfer' greyed-out MrCoops 3 814 03-13-2024 02:25 AM
Last Post: mjuliano
  Call history not showing the right information after an attended transfer wirelessmundi 5 12,644 08-15-2023 12:41 AM
Last Post: Yisroel_MongoTEL
  Transfer to Remote Phonebook Minerva 5 18,499 10-22-2020 03:11 PM
Last Post: joe.carroll@managedinstalls.com
  Blind transfer not working on hangup bug mrabbitt@clarkecounty.gov 1 5,806 12-04-2019 04:33 PM
Last Post: anonymous1711612242218
  DSS for transfer direct to voicemail lulu92 1 5,488 09-04-2019 08:42 PM
Last Post: lulu92
Exclamation Call log on after Att transfer VP-T49G Roksvel 4 10,115 06-18-2019 09:35 AM
Last Post: Roksvel
  Transfer with T2XG and call back hercross 7 12,881 09-27-2018 09:21 PM
Last Post: jolouis
  Transfer calls T26P agalindo 2 7,111 09-17-2018 09:10 AM
Last Post: agalindo
  SIP-T26P no audible ring when receiving a call from another extension proof 1 5,797 05-30-2018 06:05 AM
Last Post: Evan_Yealink
  Dial Now Rule Issue when Transfer IPBX 3 10,884 03-19-2018 04:26 PM
Last Post: IPBX

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication