[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Turn on MUTE when a call is established using Action URL and URI not successful
Author Message
acpan Offline
Junior Member
**

Posts: 2
Joined: Jul 2013
Reputation: 0
Post: #1
Turn on MUTE when a call is established using Action URL and URI not successful
Hi,

T20P
Firmware Version 9.70.0.140
Hardware Version 7.0.1.62

Q1. I want to turn on MUTE when a call is established. I thinking
of putting the following in the Action URL's Call Established Field:

http://admin:admin@$ip/cgi-bin/ConfigManApp.com?key=MUTE

where $ip is the IP address of the T20P which will be dynamically replaced by the OS of the T20P. Is it possible ? or Should the $ip be replaced with 127.0.0.1 ? I tried both, does not seems to work.

Q2. Is Action URI supported by the T20P ? How do i verify it ? I try sending the Action URI on the web browser:

http://admin:admin@192.168.1.105/cgi-bin...m?key=MUTE

But it does not seems to affect the T20P when a call is on going.

Thanks!
07-29-2013 11:39 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: Turn on MUTE when a call is established using Action URL and URI not successful
Hi Acpan,
In our V70 firmware, first, you should fill your PC address(or fill any) to trusted action URI server list, as below attached picture shows.
Then you can remote control the phone, the first time you do this, the phone LCD will prompt that warning you that someone is asking remote control your phone, then you can press Ok, and action URI will work, and the next time, it will not prompt this again.

I tried this, and wrks well:
http://10.2.10.125/cgi-bin/ConfigManApp.com?key=MUTE

About this $ip, you should input an IP address.
Thanks.


Attached File(s) Thumbnail(s)
   
07-31-2013 05:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
acpan Offline
Junior Member
**

Posts: 2
Joined: Jul 2013
Reputation: 0
Post: #3
RE: Turn on MUTE when a call is established using Action URL and URI not successful
Hi,

I tested and the result is probably not what i wanted.

What i need is when a call is received and answered, the phone is automatically muted
using the Action URL: http://10.2.10.125/cgi-bin/ConfigManApp.com?key=MUTE.

So no extra step using the PC browser is needed as you suggested.

I think the purpose of the Action URL is to automate certain key press
task based on the call status of the phone, so if i want to automate a mute
is on when a call is received, i should be able to use the Action URL.

Is it possible ?
(This post was last modified: 08-16-2013 12:18 AM by acpan.)
08-16-2013 12:17 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #4
RE: Turn on MUTE when a call is established using Action URL and URI not successful
Hi Acpan,
I think this need to be acheived with your PBX.
First, you can fill the action URL link in the "Call Established" as attached picture shows.
Then your PBX will receive this message, and know the phone is in a call, and PBX send MUTE message(for example "http://10.2.10.125/cgi-bin/ConfigManApp.com?key=MUTE") to make the phone mute immediatelly.


Attached File(s) Thumbnail(s)
   
(This post was last modified: 08-16-2013 03:36 PM by Yealink Support.)
08-16-2013 03:32 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Call forwarding with SIP devices Yealink and Cisco Call Manager CUCM joao.schlemm 8 24,878 12-27-2023 06:49 PM
Last Post: nolto
  Action URI via SIP message steve.newton 0 3,343 09-16-2021 12:19 AM
Last Post: steve.newton
  Forwarding - Action URI - T23G matiasarw 0 4,602 03-14-2021 08:13 AM
Last Post: matiasarw
  T28P foward call doesn´t work with 2.73.0.50 Tato 4 11,562 09-14-2020 03:49 PM
Last Post: complex1
  T22P Action URI ATrans and BTrans not working? DaveThompson 2 12,040 09-10-2019 10:47 AM
Last Post: DaveThompson
Photo Yealink T21P E2 displays VIA and FROM headers on incoming call DmitryTsyganov 1 7,036 07-12-2018 07:28 PM
Last Post: johnkiniston
  [BUG?]Screen backlight turn on on SIP Keep alive Kaya84 9 25,843 03-29-2018 08:27 PM
Last Post: Travis_Yealink
  T21P-E2 sends a CANCEL to put a call in hold Diego Juan 0 4,897 03-23-2018 02:52 PM
Last Post: Diego Juan
  Call Queue not working with the Grandstream UCM6202 ttran 8 22,129 03-04-2018 06:42 PM
Last Post: Adnanka
  T29G DSSKey functionality alternative number call AresK 4 12,226 12-13-2017 06:56 AM
Last Post: Evan_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication