[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G and Plantronics CS510 Headset
Author Message
jfmorris Offline
Junior Member
**

Posts: 6
Joined: Jul 2013
Reputation: 0
Post: #1
T46G and Plantronics CS510 Headset
I've just switched the entire office over from an old Samsung phone system, to Asterisk and a bunch of T46G phones. Quite a few of our users are tech support, and wear headsets all day - specifically Plantronics CS510 headsets. On the old phones, we used their hookswitch lifter, the HL10 - basically you plug the handset into a splitter, and plug the headset cable into the handset jack on the phone.

We had hoped not to need the hookswitch lifter on these T46G phones, since they have a dedicated headset port and the button for enabling the headset. Headset works just fine - if you answer the call using the softkeys on the phone. We cannot get the answer button on the headset itself to work. I played around with it for an hour, and finally gave up, and stuck the handset lifter on, and wired both headset and handset into the headset port on the T46G.

Is there any way to make this headset work properly, and be able to answer calls from the headset, without having to resort to the handset lifter?

Thanks!

Jim
07-26-2013 10:51 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
kg4ysy Offline
Member
***

Posts: 65
Joined: May 2013
Reputation: 2
Post: #2
RE: T46G and Plantronics CS510 Headset
(07-26-2013 10:51 PM)jfmorris Wrote:  I've just switched the entire office over from an old Samsung phone system, to Asterisk and a bunch of T46G phones. Quite a few of our users are tech support, and wear headsets all day - specifically Plantronics CS510 headsets. On the old phones, we used their hookswitch lifter, the HL10 - basically you plug the handset into a splitter, and plug the headset cable into the handset jack on the phone.

We had hoped not to need the hookswitch lifter on these T46G phones, since they have a dedicated headset port and the button for enabling the headset. Headset works just fine - if you answer the call using the softkeys on the phone. We cannot get the answer button on the headset itself to work. I played around with it for an hour, and finally gave up, and stuck the handset lifter on, and wired both headset and handset into the headset port on the T46G.

Is there any way to make this headset work properly, and be able to answer calls from the headset, without having to resort to the handset lifter?

Thanks!

Jim

You likely need one of these...http://www.yealink.com/product_info.aspx?ProductsCateID=195&CateId=148&BaseInfoCateId=195&Cate_Id=195&parentcateid=148

I'm not 100% if they are compatible with the T46, but they are used for the 2X and 3X phones.
07-30-2013 01:30 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jfmorris Offline
Junior Member
**

Posts: 6
Joined: Jul 2013
Reputation: 0
Post: #3
RE: T46G and Plantronics CS510 Headset
(07-30-2013 01:30 AM)kg4ysy Wrote:  You likely need one of these...http://www.yealink.com/product_info.aspx?ProductsCateID=195&CateId=148&BaseInfoCateId=195&Cate_Id=195&parentcateid=148

I'm not 100% if they are compatible with the T46, but they are used for the 2X and 3X phones.

Thanks - I had found those too, but the description does not mention compatibility with the T46g, so I am hesitant to go off and buy a half dozen of these, until I know a little more.
(This post was last modified: 07-30-2013 01:35 AM by jfmorris.)
07-30-2013 01:35 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 24
Post: #4
RE: T46G and Plantronics CS510 Headset
Hi Jfmorris,
Sorry actually now we are still making compatible test with wireless headset, after we release commercial firmware of T46G, we will also public a compatible table with wireless headset, there maybe some different with T2/T3 series.
07-30-2013 05:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jfmorris Offline
Junior Member
**

Posts: 6
Joined: Jul 2013
Reputation: 0
Post: #5
RE: T46G and Plantronics CS510 Headset
Ok - thanks for letting me know. I will just use our hookswitch lifters then.
07-30-2013 07:37 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Headset auto answer waiting call T43U and WH62 TravisD 3 494 06-21-2022 11:58 AM
Last Post: TravisD
  WH67 Headset - DOES NOT RING IN EAR ON INCOMING CALL GlasairII 1 879 03-31-2022 02:53 AM
Last Post: Yisroel_MongoTEL
  WH67 firmware update failed and bricked my headset! dbeiser 1 961 03-21-2022 03:51 PM
Last Post: markvdheijden
  Custom Dialing T46G sfrazier 2 3,485 01-17-2022 02:09 AM
Last Post: sfrazier
Exclamation T46G TIME Calculation Problem briankelly63 5 13,412 12-06-2021 10:09 AM
Last Post: jeanpierre26
  Versions (T46G) 28.83.0.55 sfrazier 2 4,096 01-08-2020 10:08 PM
Last Post: jolouis
  Headset volume too loud avayax 0 3,143 04-17-2019 01:07 AM
Last Post: avayax
  Active headset and speaker together IPBX 1 4,778 03-19-2018 04:21 PM
Last Post: charlottemason
Question How to optimize T46G? kubi 2 7,304 02-05-2018 02:48 PM
Last Post: Sbo
Bug T46G Configure key to operate as a VTR key? Will Redmond 5 11,659 05-20-2017 01:23 AM
Last Post: Kevin_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication