BLF strips / labels

[nazg82]

Hi,

Can you supply me with instructions about how to print the BLF strips / labels? Can this be done on a normal laser printer? Or perhaps any other suggestion?

[admin1]

Please download the lable template from below link, I think it can be printed by a laser printer, you can make a try.

ftp://yealinkftp:yealinkftp@ftp.yealink....mplate.doc

[nazg82]

Hi,

Thank you for your response.

But I would like to print on the labels directly.
If I print on normal paper, I have to cut out the BLF keys. For 42 yealink T28P's...

[Mauro]

I suppose you may write them down "at hand", ore use a label printer (like a DYMO) to print many small labels...

[admin1]

Hello, you can buy the labels and plastic covers from below link directly,

http://labels.desi.com/category-exec/cat...nm/Yealink

[elementpbx]

ADMIN...DESI does not sell plastic covers for Yealink. Is there a source? Your phones plastic cover somtimes falls off in shipping or custoemrs throw them out in the plastic bag. We need a source to purchase covers.

Thank You

[Yealink Support]

(02-19-2013 10:21 AM)elementpbx Wrote:  ADMIN...DESI does not sell plastic covers for Yealink. Is there a source? Your phones plastic cover somtimes falls off in shipping or custoemrs throw them out in the plastic bag. We need a source to purchase covers.

Thank You

Hello, elementpbx
The plastic covers you can contact the reseller, if the reseller not have the plastic covers you can let the reseller contact the The higher level agent.

[Henri Elspass]

(11-21-2012 06:45 PM)admin Wrote:  Please download the lable template from below link, I think it can be printed by a laser printer, you can make a try.

ftp://yealinkftp:yealinkftp@ftp.yealink....mplate.doc

the link seems to be broken
or file no more exist

but it's needed

regards
henri

[nazg82]

If I print the template with names, how can I simply cut out the holes for the BLF buttons on the T28P? With a scissor, this is impossible..

[Mauro]

The download link "admin" posted months ago (.doc) is no longer working. Is it possible to have an updated link?

However, I suppose one might do a try (after printing on cardboard?) using an "utility knife"... but I can guess the result won't be perfect, and would require a lot of patience...

Well, looking at the shape, with EXP38 it may be possible: http://labels.desi.com/product_huge_imag...gwMC5qcGc=
But with T38, T28 and T26 it would be more difficult: http://labels.desi.com/product_huge_imag...c5NS5qcGc=