[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G Redefine Hold Button - Ques
Author Message
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #21
RE: T46G Redefine Hold Button - Ques
Hi, V80 firmware of T4x and new T2x(T21_E2/T23/T27/T29) will support EDK feature will allow users customize a softkey.
The feature is possible to be achieved at that time.
EDK feature won't be added in first relased of V80, it will be added in an enhanced release of V80.

Regards,
James
05-14-2015 04:42 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
alexgonzalez Offline
Junior Member
**

Posts: 38
Joined: Jul 2014
Reputation: 0
Post: #22
RE: T46G Redefine Hold Button - Ques
(05-14-2015 04:42 PM)Yealink_James Wrote:  Hi, V80 firmware of T4x and new T2x(T21_E2/T23/T27/T29) will support EDK feature will allow users customize a softkey.
The feature is possible to be achieved at that time.
EDK feature won't be added in first relased of V80, it will be added in an enhanced release of V80.

Regards,
James

Any update on this much needed feature release?
Alex
09-16-2015 10:49 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
alexgonzalez Offline
Junior Member
**

Posts: 38
Joined: Jul 2014
Reputation: 0
Post: #23
RE: T46G Redefine Hold Button - Ques
(05-14-2015 04:42 PM)Yealink_James Wrote:  Hi, V80 firmware of T4x and new T2x(T21_E2/T23/T27/T29) will support EDK feature will allow users customize a softkey.
The feature is possible to be achieved at that time.
EDK feature won't be added in first relased of V80, it will be added in an enhanced release of V80.

Regards,
James

James, there have been several releases of V80 including 28.80.0.70. When will this get done? We have waited much too long now.
10-11-2015 12:36 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
LeoS Offline
Junior Member
**

Posts: 1
Joined: Feb 2016
Reputation: 0
Post: #24
RE: T46G Redefine Hold Button - Ques
Any updates to this?
02-10-2016 05:11 AM
Find all posts by this user    like1    dislike0 Quote this message in a reply
euser4life Offline
Junior Member
**

Posts: 8
Joined: Jan 2014
Reputation: 0
Post: #25
RE: T46G Redefine Hold Button - Ques
Hi James is there any updates to this. We also desperately need this functionality.

(05-14-2015 04:42 PM)Yealink_James Wrote:  Hi, V80 firmware of T4x and new T2x(T21_E2/T23/T27/T29) will support EDK feature will allow users customize a softkey.
The feature is possible to be achieved at that time.
EDK feature won't be added in first relased of V80, it will be added in an enhanced release of V80.

Regards,
James
02-27-2016 10:07 PM
Find all posts by this user    like1    dislike0 Quote this message in a reply
alexgonzalez Offline
Junior Member
**

Posts: 38
Joined: Jul 2014
Reputation: 0
Post: #26
RE: T46G Redefine Hold Button - Ques
(05-14-2015 04:42 PM)Yealink_James Wrote:  Hi, V80 firmware of T4x and new T2x(T21_E2/T23/T27/T29) will support EDK feature will allow users customize a softkey.
The feature is possible to be achieved at that time.
EDK feature won't be added in first relased of V80, it will be added in an enhanced release of V80.

Regards,
James

We really need this, any update? Can you please reply when this function is coming, we have be waiting....
03-14-2016 01:23 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
chrisduncansb Offline
Junior Member
**

Posts: 15
Joined: Sep 2013
Reputation: 0
Post: #27
RE: T46G Redefine Hold Button - Ques
Bump.

It's been years since this has been promised. We need this feature.
02-21-2017 08:37 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
alexgonzalez Offline
Junior Member
**

Posts: 38
Joined: Jul 2014
Reputation: 0
Post: #28
RE: T46G Redefine Hold Button - Ques
I can't count the number of customers I have lost or didn't want to have two ways of putting a call on hold. They want one way to put calls on hold and be able to grab them from anywhere or page and have someone else pickup. I have basically told clients to buy a different system because its not worth the grief later. I do wish Yealink could understand the importance of this feature and finally deliver a version with this. It has been more than a year, and my clients still ask me for it now. Asking when....

Don't know what else to do, but try to keep the thread alive with a bump, like you did.

Thanks,
Alex

(05-14-2015 04:42 PM)wujs Wrote:  Hi, V80 firmware of T4x and new T2x(T21_E2/T23/T27/T29) will support EDK feature will allow users customize a softkey.
The feature is possible to be achieved at that time.
EDK feature won't be added in first relased of V80, it will be added in an enhanced release of V80.

Regards,
James


James, what do we need to do to get this done Please! It's been promised long ago. Alex
(This post was last modified: 02-21-2017 09:00 PM by alexgonzalez.)
02-21-2017 08:58 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
chrisduncansb Offline
Junior Member
**

Posts: 15
Joined: Sep 2013
Reputation: 0
Post: #29
RE: T46G Redefine Hold Button - Ques
I am about to lose a large customer over this as well. They think we are incompetent because we can't make the hold button put calls on hold and it is a training issue for them.
02-21-2017 09:04 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
alexgonzalez Offline
Junior Member
**

Posts: 38
Joined: Jul 2014
Reputation: 0
Post: #30
RE: T46G Redefine Hold Button - Ques
(02-21-2017 09:04 PM)chrisduncansb Wrote:  I am about to lose a large customer over this as well. They think we are incompetent because we can't make the hold button put calls on hold and it is a training issue for them.

Totally agree with you, it's very frustrating. No one wants to have to train someone to think about which way a call is going to go in advance. Making the Hold button on the phone be the call park feature is what we need to be able to do to solve this issue.

Thanks,
Alex

(05-14-2015 04:42 PM)wujs Wrote:  Hi, V80 firmware of T4x and new T2x(T21_E2/T23/T27/T29) will support EDK feature will allow users customize a softkey.
The feature is possible to be achieved at that time.
EDK feature won't be added in first relased of V80, it will be added in an enhanced release of V80.

Regards,
James

Beginning to wonder if we are being understood? EDK was added in v81.20. However this is to customize the softkeys from what I can see? What we have been asking for is a way to customize the hardkey HOLD button to Park a Call as a form of HOLD. So we need a way to program the hardkey HOLD to do functions like a DSSkey, when the phone is off the hook or in use. If there is a way to do this already, we all would like to know.

Hope this clarifies issue.
Regards,
Alex
(This post was last modified: 02-21-2017 10:39 PM by alexgonzalez.)
02-21-2017 09:43 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T46G/T48G no Ringtone because of 183 insted of ringing eurix 2 127 04-09-2021 05:16 PM
Last Post: eurix
Heart T46G/T46S - Permission Denied! andy.hughes@intelligencehs.co.uk 1 338 03-19-2021 08:59 PM
Last Post: Yisroel_MongoTEL
  yealink t46g Ssl VPN sarajennifer 0 259 03-11-2021 02:41 PM
Last Post: sarajennifer
  Call-Info sip header for T46G sidjf3zhdu 9 14,841 02-22-2021 04:06 PM
Last Post: jiansong
  yealink T46g cannot disable lcd screensaver mike702 2 596 02-10-2021 04:33 AM
Last Post: jamesbchz
Bug Yealink T46G wont turn on after firmware update mike702 1 552 02-02-2021 08:21 PM
Last Post: complex1
  T42S Headset Button Hangup absoffthewake 1 1,901 11-13-2020 09:34 PM
Last Post: smuser
  Line Key6-10 Greyd Out - T46G redmondsau 0 658 10-02-2020 07:38 AM
Last Post: redmondsau
  UH36 Support in T46G jinto.antony 1 1,161 10-01-2020 04:58 PM
Last Post: Yisroel_MongoTEL
  t46s calls on hold operation comstar 7 5,178 09-22-2020 06:27 PM
Last Post: Yisroel_MongoTEL

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication