[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Call parking/transfer fails at random
Author Message
Jaap Offline
Junior Member
**

Posts: 4
Joined: Jul 2013
Reputation: 0
Post: #1
Call parking/transfer fails at random
I'm having trouble transferring calls with my t22p's as they fail at random. Normally the caller should get music on hold (and when they do it works great), but often they don't get any music and we can't transfer the call to another extension.

Somehow the call doesn't seem to park as it should. I'm having the same problem at all my yealink's.

Any ideas of settings I could try?

Regards,


Jaap
07-06-2013 04:41 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: Call parking/transfer fails at random
Hi Jaap,
1. Do you have the latest firmware 7.70.0.140?
http://www.yealink.com/Upload/firmware/T....0.140.zip
2. Do you mean the phone can't make the blind transfer? For example, A talked with B, A press Transfer+C number+Transfer, but B don't hear the music when it's held, and C didn't ringing?
3. About the call park issue, when you press Call park(already set the park feature code) on A, but the call didn't park, A is still in conversation?
4. What PBX are you using? And these issues happened randomly, not every time?
Thanks.
07-08-2013 10:40 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Jaap Offline
Junior Member
**

Posts: 4
Joined: Jul 2013
Reputation: 0
Post: #3
RE: Call parking/transfer fails at random
1. Running 7.70.13.4 and somehow upgrade to 7.70.0.140 fails.
2. Attended transfering fails, so A talks to B. A presses tran+C-number#. A talks to C and then tran presses tran to connect B to C. When the call is placed in the waiting queue correctly waiting music will sound (and transfering goes as it should). When there's no music, transfering fails.
3. When only using hold the same symtoms occur. Sometimes the holding music and sometimes nothing. We can always get back to the waiting call, so it parks the call.
4. We're using a hosted PBX system. It's hosted at sip.sipnl.nl.

Hope this give a little more information.
07-08-2013 04:31 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #4
RE: Call parking/transfer fails at random
Hi Jaap,
Oh so this is a special firmware, please contact your local distributor-Tiptel, i think there are some custom setting that make these features failed.
Or ask them is there any special setting can resolved this.
Thanks.
07-08-2013 04:44 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Jaap Offline
Junior Member
**

Posts: 4
Joined: Jul 2013
Reputation: 0
Post: #5
RE: Call parking/transfer fails at random
Dear,

It's a yealink phone which I've purchased, with yealink firmware.

Some are stuck at fw 7.70.13.9 and some at 7.70.13.4

Manually uploading 7.70.0.14 through the phones website doesn't work. Actually it looks like everything is running fine, but upon reboot, the old firmware is still on the phone.

Is there a solution to update the firmware, so I could check whether this solves the call hold problem?

Thanks,

Jaap

(07-08-2013 04:44 PM)Yealink Support Wrote:  Hi Jaap,
Oh so this is a special firmware, please contact your local distributor-Tiptel, i think there are some custom setting that make these features failed.
Or ask them is there any special setting can resolved this.
Thanks.
07-08-2013 06:24 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #6
RE: Call parking/transfer fails at random
Hi Jaap,
Because these firmware have software protection(made by tiptel), you can't upgrade them to neutual firmware, so you need to contact your distributor to resolve this.
Sorry and Thanks.
07-09-2013 11:34 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Call forwarding with SIP devices Yealink and Cisco Call Manager CUCM joao.schlemm 8 24,881 12-27-2023 06:49 PM
Last Post: nolto
  Dial-Now fails to recognize time-out braymond 2 10,278 01-31-2023 05:33 PM
Last Post: eddie79it
  Firmware upgrade fails on T21P E2 p.pasquino@technology4you.it 0 5,171 11-02-2021 04:42 PM
Last Post: p.pasquino@technology4you.it
  T21P Stuck on "Initializing" - Recovery Mode Fails` YCMJamie 5 13,245 08-24-2021 07:04 PM
Last Post: YCMJamie
  Multiline Transfer T29G pedro_indy 0 5,278 11-27-2020 01:11 AM
Last Post: pedro_indy
  T28P foward call doesn´t work with 2.73.0.50 Tato 4 11,565 09-14-2020 03:49 PM
Last Post: complex1
Lightbulb Yealink T28P Firmware Upgrade Fails Michelth 11 54,835 06-27-2020 10:13 AM
Last Post: complex1
  Attended transfer not working T29G chysky@slany.cz 1 6,286 02-11-2020 02:48 PM
Last Post: chysky@slany.cz
Photo Yealink T21P E2 displays VIA and FROM headers on incoming call DmitryTsyganov 1 7,038 07-12-2018 07:28 PM
Last Post: johnkiniston
  Blind Transfer (Alert Info) ring on FreePBX v13 Jorge12 1 6,717 05-30-2018 05:46 AM
Last Post: anonymous1711612242218

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication