Log in

skybyte · 07-05-2013 07:30 PM

hi,There are some problems about you phone vlan feature：

enable vlan on 2 T-28P，which were in the same vlan，

match the same pvid and priority.
why they couldn't establish calls?

***Yealink Support*** · 07-08-2013 02:41 PM

Hi Skybyte,
Do you mean when you enabled VLAN, you can't make the calls between these two T28P phones?
Can they register sucessfullly?
Do you have the latest firmware?
http://www.yealink.com/Upload/firmware/T....0.140.zip
Thanks.

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	No dial tone when connecting calls internally	tvettel	0	97	04-17-2024 02:20 PM Last Post: tvettel
	Always ask where transfer calls	ivan2808	0	212	04-10-2024 10:16 PM Last Post: ivan2808
	T48S One Way Audio When Calls Are Put On Hold Or Transferred	MJauja	1	502	03-09-2024 08:48 PM Last Post: complex1
	Yealink T19 can not automatically hangup inbound calls	giaopc94	0	1,708	08-01-2022 09:28 AM Last Post: giaopc94
	Missed calls list... caller id.. outbound route pattern	savi	0	1,931	06-05-2022 03:09 PM Last Post: savi
	3CX / Yealink passthrough VLAN issue (when phone is rebooted)	maindriver	4	11,765	03-24-2022 10:25 PM Last Post: maindriver
	Manage SIP accounts enable / disable with EDK macros	jsubirana	9	14,966	01-27-2022 10:13 PM Last Post: wwg
	Limit maximum of active calls per phone	elastalink	5	15,275	09-09-2021 03:52 AM Last Post: kapetrosyan
	How to enable G.729 Annex B (annexb=yes)	sszymczyk	1	6,474	07-11-2019 02:47 AM Last Post: Kevin_Yealink
	Display Caller Picture on internal calls via LDAP	dawgness	6	22,498	03-07-2019 01:41 AM Last Post: scubes

Threaded Mode \| Linear Mode enable vlan on 2 T-28P, fail to make calls?
Author	Message