[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T28P + EXP39 BLF dialling fails when dialled extension is receiving calls
Author Message
Benoiti Offline
Junior Member
**

Posts: 5
Joined: Jun 2013
Reputation: 0
Post: #1
T28P + EXP39 BLF dialling fails when dialled extension is receiving calls
Hi, this issue is on the same handsets as my prior topic.

When there is an incoming call to a station (A) and another station (B) presses the console BLF for A, the call fails and the extension number is duplicated on the phone's screen, eg. if the extension number is 123, then the screen displays 123123.

However, in the same scenario, if the extension number for A is dialed from the keypad of B while A is already ringing, the call works normally. So it seems that the console has trouble

I've attached the pcap and log.


Attached File(s)
.tar  syslog.tar (Size: 545 KB / Downloads: 2)
.pcap  2.70.0.140_21-41-27.pcap (Size: 161.86 KB / Downloads: 2)
(This post was last modified: 06-20-2013 07:49 PM by Benoiti.)
06-20-2013 07:26 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: T28P + EXP39 BLF dialling fails when dialled extension is receiving calls
Hi Maerkis,
Do these two phones have the same firmware 2.70.0.140?
In our V70, you just need to fill the pick up feature code in the BLF Extension, as the attachment(For example *87 is the pick up feature code).


Attached File(s) Thumbnail(s)
   
06-21-2013 02:17 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Benoiti Offline
Junior Member
**

Posts: 5
Joined: Jun 2013
Reputation: 0
Post: #3
RE: T28P + EXP39 BLF dialling fails when dialled extension is receiving calls
Yes, call pickup works ok, but in this case, the user is not trying to pick up the call at the other extension, they are trying to dial the extension using the BLF key. Normally, the other extension will show two incoming calls (the first call, plus the call from the second extension), but only if the keypad is used to dial. It seems that the EXP39 cannot dial an extension via BLF key if the extension is already ringing, but it duplicates the extension number on the screen and the call fails.

All phones are using 2.70.0.140
06-21-2013 02:28 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Tecno Offline
Junior Member
**

Posts: 19
Joined: Dec 2012
Reputation: 0
Post: #4
RE: T28P + EXP39 BLF dialling fails when dialled extension is receiving calls
i have a same problem!!!



Regards

Tecno
08-07-2013 05:52 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #5
RE: T28P + EXP39 BLF dialling fails when dialled extension is receiving calls
Hi Maerkis,
Here i tested with your step:
C call B, B is ringing, A(or exp39) press BLF key(with B number) to call B, and it can call out sucessfully, it will not display such "123123" result.
So could you send me your config file so i can test again at my side?
And BTW, in what scenarios customer will use like this? Why they will press BLF button when they know there's already have an incoming call on the monitor number?
Thanks.


Attached File(s) Thumbnail(s)
   
(This post was last modified: 08-07-2013 05:34 PM by Yealink Support.)
08-07-2013 05:33 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T28P - OpenVPN TLS error: Unsupported protocol 1sae 0 2,064 07-18-2023 06:50 AM
Last Post: 1sae
  Dial-Now fails to recognize time-out braymond 2 11,959 01-31-2023 05:33 PM
Last Post: eddie79it
  Firmware upgrade fails on T21P E2 p.pasquino@technology4you.it 0 6,773 11-02-2021 04:42 PM
Last Post: p.pasquino@technology4you.it
  T21P Stuck on "Initializing" - Recovery Mode Fails` YCMJamie 5 17,163 08-24-2021 07:04 PM
Last Post: YCMJamie
  Using SIP-T29G with SangomaOS (parked calls) Shawn 0 5,422 01-09-2021 08:24 AM
Last Post: Shawn
  T28P foward call doesn´t work with 2.73.0.50 Tato 4 13,438 09-14-2020 03:49 PM
Last Post: complex1
Lightbulb Yealink T28P Firmware Upgrade Fails Michelth 11 59,844 06-27-2020 10:13 AM
Last Post: complex1
  T28P LDAP Problem oguzhan 1 8,714 06-10-2020 01:14 PM
Last Post: beldimon
  T21P E2: Missed calls: How to show caller's number? quazgar 1 9,454 12-05-2019 07:19 AM
Last Post: Walter_Yealink
  SIP-T27G no Refresh Display BLF Monitoring When Receiving subsequence Notify cleviton 1 7,881 05-03-2019 09:56 AM
Last Post: Kamik

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication