[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Incoming Call Handling
Author Message
IsaacSchneider Offline
Junior Member
**

Posts: 10
Joined: Jun 2013
Reputation: 0
Post: #1
Incoming Call Handling
Hello,

I am evaluating the T46G model of phone. I have found that I do not receive proper notification of an inbound call while on an existing call. Once I hang up the phone the display will show the missed calls. I believe that this is possibly due to my programming.

Currently I have two different accounts loaded on the phone in #1 and #2 positions. I was looking for a way to program the keys to use a specified account to give me the multiple appearances needed for proper notification.

Am I on the right track? Any help would be appreciated.

Thanks,
Isaac
06-14-2013 07:34 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 24
Post: #2
RE: Incoming Call Handling
(06-14-2013 07:34 AM)IsaacSchneider Wrote:  Hello,

I am evaluating the T46G model of phone. I have found that I do not receive proper notification of an inbound call while on an existing call. Once I hang up the phone the display will show the missed calls. I believe that this is possibly due to my programming.

Currently I have two different accounts loaded on the phone in #1 and #2 positions. I was looking for a way to program the keys to use a specified account to give me the multiple appearances needed for proper notification.

Am I on the right track? Any help would be appreciated.

Thanks,
Isaac

Hi Isaac,
I found you post many issues in the Forum Smile
Could you let us know where are you from? And where you buy the phone from? So i can suggest special technical support team for you to provide a better support.
And you can also send the email to our support@yealink.com, thanks.
06-14-2013 01:53 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
IsaacSchneider Offline
Junior Member
**

Posts: 10
Joined: Jun 2013
Reputation: 0
Post: #3
RE: Incoming Call Handling
(06-14-2013 01:53 PM)Yealink Support Wrote:  Hi Isaac,
I found you post many issues in the Forum Smile

I find that posting out in the open not only helps me but others as well to solve a particular issue. This also helps you the manufacturer create a better product, increase trust and brand perceptions.

(06-14-2013 01:53 PM)Yealink Support Wrote:  Could you let us know where are you from? And where you buy the phone from? So i can suggest special technical support team for you to provide a better support.
And you can also send the email to our support@yealink.com, thanks.

Based in the US, I have purchased thru many different authorized distributors.

Briefly after posting this message I found what i was looking for after poking around the phone for a bit.

To add additional call appearances:

  1. Login as admin to the phones webgui.
  2. Click on the "DSS Key" Tab on top.
  3. Click on the "Line Key 1-9" on the left.
    This will open the first 9 programmable softkeys.
  4. For each Line Key row is a slot as a Soft/Display key.
    The first column is the type of key, line,speeddial, blf, etc.
    In this case we select Line for the type.
  5. In the next column titled Value select float.
    The difference between float and fixed is when fixed is selected the key is always visible between screen pages.
  6. In the column titled Line this is the account to use. It is a bit confusing at first glance.
    (Yealink please change label from Line to Account.)
    So to create an appearance for Account 1 select Line 1, Account 2 select Line 2..etc.
  7. Repeat in each Line Key row for each call appearance you wish to add.
  8. Dont forget to press the Confirm button to save the settings.


That did it for me. Hope this helps someone else as well.

-Isaac
(This post was last modified: 06-16-2013 03:30 AM by IsaacSchneider.)
06-16-2013 02:41 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 24
Post: #4
RE: Incoming Call Handling
Hi Isaac,
Oh, i understand your meaning now. And thanks for your sharing. Smile
You are correct, when you select Float in the Value field, the phone will automatically switch to the page the line key locates, when the line key receives an incoming call.
Thanks.
06-17-2013 10:40 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  How to show caller Phone Number when call is forwarded gijoe 0 246 05-31-2022 07:40 PM
Last Post: gijoe
  T43-U incoming calls do not land on the correct line/button rtfm2022 7 1,461 05-12-2022 05:41 PM
Last Post: rtfm2022
  T46 - Program Message Button for a Help call? harrys 0 563 03-31-2022 11:08 PM
Last Post: harrys
  Ended call still rings on receiver devices casi-online 2 3,381 08-05-2021 06:40 PM
Last Post: casi-online
  Rearrange in call buttons frichardson 0 1,777 06-16-2021 11:53 PM
Last Post: frichardson
  T41S: Bridge current call with a second incoming call digitel 1 2,829 05-21-2021 04:15 PM
Last Post: complex1
  Public Phonebook on incomming call Oliaargau 3 8,914 04-16-2021 05:34 PM
Last Post: Oliaargau
  Stop displaying Username on phone after call is connected rtilleman 1 3,605 04-06-2021 12:19 AM
Last Post: marcelm
  Call Park + Audible / Visual Alerts bdm 0 2,024 02-23-2021 04:24 AM
Last Post: bdm
  Call-Info sip header for T46G sidjf3zhdu 9 21,906 02-22-2021 04:06 PM
Last Post: jiansong

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication