[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DSSKey and Call Forward
Author Message
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #11
RE: DSSKey and Call Forward
ok, BTW, do you know which brand IP phone can support this feature now?
07-25-2013 02:50 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
mkeuter Offline
Asterisk Integrator
***

Posts: 82
Joined: Jul 2013
Reputation: 3
Post: #12
RE: DSSKey and Call Forward
I would also like to have this feature.

BTW: my snom 360 (FW: 8.7.3.19) phones work fine with this feature for years. The difference to Yealink is, that the Call Forward target in the snom Preferences stays empty, when I activate this feature with a key.


Attached File(s) Thumbnail(s)
   

Michael

http://www.mksolutions.info
(This post was last modified: 07-28-2013 01:13 AM by mkeuter.)
07-28-2013 01:07 AM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Kriss Offline
Junior Member
**

Posts: 20
Joined: May 2013
Reputation: 1
Post: #13
RE: DSSKey and Call Forward
Sry to "re-open" this post but :

Jasit,
Many thanks for your help, it works like a charm !

./Kriss
10-10-2013 12:15 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jasit Offline
Member
***

Posts: 85
Joined: Mar 2013
Reputation: 0
Post: #14
RE: DSSKey and Call Forward
thanks for the feedback.
10-10-2013 12:38 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
thomas@evema.nl Offline
Junior Member
**

Posts: 1
Joined: Oct 2013
Reputation: 0
Post: #15
RE: DSSKey and Call Forward
Many clients ask for this feature as well to forward to different phone numbers pre-set on a DSS key .
In this case the light turns on when the button forward I pressed but in fact it toggles the last known forward state in Broadsoft.
If it is possible in the near feature to create a button with a preset forward number and a Lamp sign with that button on the phone then this will solve a lot of problems Hosted VoIP still has such as Night service with light indication.
So yes please …. 
10-31-2013 07:37 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #16
RE: DSSKey and Call Forward
(07-22-2013 08:59 PM)industriecontact Wrote:  Dear Yealink Support,

we'd love to see this feature in a future firmware version as well.
Currently there's no way to alter the forward destination than by wading through a set of menu entries.

It would be VERY nice to change the forward destination with a single key stroke or with an action URI.

Please contact your product department repeatedly until they implement this feature! ;-)

Hi industriecontact,

You can using action URI to change the forward destination.
1. Please first fill the trust IP address in the phone first.
(Enter the webpage->Phone->Features->Remote Control Security, fill the trust IP address in the "Trusted Action URI Server List")

2. Open a brower, then fill in the below syntax
http://phoneIP/cgi-bin/cgiServer.exx?forward=set&Forward_always_enable=x&Forward_always_target=xxx

[Note]
(1) "forward=set" means this is forward setting, and can be set follow by many & .
(2) You can set many parameters such as: Forward_always_enable、Forward_always_target、Forward_busy_enable、Forward_busy_tar​get、Forward_noanswer_enable、Forward_noanswer_target
(3) Forward_always_enable=x, x=0 means disable always forward; x=1 means enable always forward. And so on.

For example:

Code:
http://10.2.20.61/cgi-bin/cgiServer.exx?forward=set&Forward_always_enable=1&Forward_always_target=533

That means always forwards is on and forward to 533.
(This post was last modified: 03-25-2014 11:01 AM by Yealink Support.)
11-04-2013 04:43 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
obram_tp Offline
Junior Member
**

Posts: 3
Joined: Oct 2013
Reputation: 0
Post: #17
RE: DSSKey and Call Forward
It's possible to "auto clear" Forward' destination with Action URL, HTTP server and small script.
1. Set HTTP server IP in Trusted Action URI Server List of the phones.
2. In phone's config: Action URL -> Always Forward Off set: "http://ser.ver.ip.addr/Forward_off.php?ip=$ip"
3. on http server place this script named Forward_off.php:
Code:
<?php
function push2phone($server,$phone)
{
$ch = curl_init();
curl_setopt($ch, CURLOPT_URL, "http://admin:pass@".$phone."/cgi-bin/cgiServer.exx?forward=set&Forward_always_enable=0&Forward_always_target=");
curl_setopt($ch, CURLOPT_HEADER, 0);
curl_exec($ch);
curl_close($ch);
}
$ip = $_REQUEST['ip'];
push2phone("ser.ver.ip.addr",$ip);
// insert real server IP in above line
?>

Smile
11-09-2013 05:21 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Frank Drews Offline
Member
***

Posts: 63
Joined: Jan 2014
Reputation: 0
Post: #18
RE: DSSKey and Call Forward
Hi,

we really would love to have this feature, dircetly accessible to the user. I mean, changing the forward destination ("Forward_always_target") on a DSS-Key, as easy as all the other DSS-Key configurations, which can be done by the user himself, via the phone or via the webinterface of the phone or via provisioning DSS-Keys.

Keep up the great work
Best regards Frank


(11-04-2013 04:43 PM)Yealink Support Wrote:  
(07-22-2013 08:59 PM)industriecontact Wrote:  Dear Yealink Support,

we'd love to see this feature in a future firmware version as well.
Currently there's no way to alter the forward destination than by wading through a set of menu entries.

It would be VERY nice to change the forward destination with a single key stroke or with an action URI.

Please contact your product department repeatedly until they implement this feature! ;-)

Hi industriecontact

You can using action URI to change the forward destination.
1. Please first fill the trust IP address in the phone first.
(Enter the webpage->Phone->Features->Remote Control Security, fill the trust IP address in the "Trusted Action URI Server List")

2. Open a brower, then fill in the below syntax
http://phoneIP/cgi-bin/cgiServer.exx?forward=set&Forward_always_enable=x&Forward_always_target=xxx

[Note]
(1) "forward=set" means this is forward setting, and can be set follow by many & .
(2) You can set many parameters such as: Forward_always_enable、Forward_always_target、Forward_busy_enable、Forward_busy_tar​get、Forward_noanswer_enable、Forward_noanswer_target
(3) Forward_always_enable=x, x=0 means disable always forward; x=1 means enable always forward. And so on.

For example:

http://10.2.20.61/cgi-bin/cgiServer.exx?...target=533

That means always forwards is on and forward to 533.

Hi,

we really would love to have this feature, dircetly accessible to the user. I mean, changing the forward destination ("Forward_always_target") on a DSS-Key, as easy as all the other DSS-Key configurations, which can be done by the user himself, via the phone or via the webinterface of the phone or via provisioning DSS-Keys.

Keep up the great work
Best regards Frank


(11-04-2013 04:43 PM)Yealink Support Wrote:  
(07-22-2013 08:59 PM)industriecontact Wrote:  Dear Yealink Support,

we'd love to see this feature in a future firmware version as well.
Currently there's no way to alter the forward destination than by wading through a set of menu entries.

It would be VERY nice to change the forward destination with a single key stroke or with an action URI.

Please contact your product department repeatedly until they implement this feature! ;-)

Hi industriecontact

You can using action URI to change the forward destination.
1. Please first fill the trust IP address in the phone first.
(Enter the webpage->Phone->Features->Remote Control Security, fill the trust IP address in the "Trusted Action URI Server List")

2. Open a brower, then fill in the below syntax
http://phoneIP/cgi-bin/cgiServer.exx?forward=set&Forward_always_enable=x&Forward_always_target=xxx

[Note]
(1) "forward=set" means this is forward setting, and can be set follow by many & .
(2) You can set many parameters such as: Forward_always_enable、Forward_always_target、Forward_busy_enable、Forward_busy_tar​get、Forward_noanswer_enable、Forward_noanswer_target
(3) Forward_always_enable=x, x=0 means disable always forward; x=1 means enable always forward. And so on.

For example:

http://10.2.20.61/cgi-bin/cgiServer.exx?...target=533

That means always forwards is on and forward to 533.
(This post was last modified: 03-24-2014 08:20 PM by Frank Drews.)
03-24-2014 08:20 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T31, call history, delete old records sles 3 807 01-12-2024 01:33 PM
Last Post: sles
  T30 peer-2-peer call mikrob 2 908 12-10-2023 02:01 AM
Last Post: mikrob
  Dialog-Info Call Pickup Greysi 6 34,077 10-31-2018 03:54 PM
Last Post: cleviton
  Call Park Pickup different with T3x and T2x vondie 21 78,924 01-09-2018 04:45 PM
Last Post: vondie
  TLS - Unauthorized Response To INVITE halts call on TLS close [SOLVED] kg4ysy 10 36,486 06-24-2015 11:11 PM
Last Post: kg4ysy
  T38 Call Park, BLF light stays red mdctech 1 9,849 12-05-2014 07:51 PM
Last Post: Wilson_Yealink
  32.70.1.11, puts call on hold instead of tranfer - Solved jasit 6 20,875 10-22-2014 09:45 PM
Last Post: jasit
  Action URI to hangup call on T3x V70 W3TEL_Support 8 31,420 10-16-2014 08:22 PM
Last Post: Wilson_Yealink
  T38G call back not work tlc 1 9,741 09-01-2014 08:40 PM
Last Post: Wilson_Yealink
  Name column in call list Ruben 1 8,894 09-01-2014 08:28 PM
Last Post: Wilson_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication