[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Disable voicemail beep with old configuration files
Author Message
jcaruso Offline
Junior Member
**

Posts: 20
Joined: May 2013
Reputation: 0
Post: #1
Disable voicemail beep with old configuration files
I was going to post a question requesting how to disable the voicemail tones on a T-26 if using the old provisioning configuration files, but I just figured it out. So instead I'll share my solution if anyone is having the same issue.

We upgraded the phones to the latest firmware before V70. For the T-26 it was 6.61.23.16. After that I went into the individual MAC.cfg file for the phone and under [Features] I added VoiceMailTone = 0

This line disabled the voicemail beep without having to modify the tone settings, stutter, etc.
05-30-2013 09:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Bryan Nelson Offline
Member
***

Posts: 71
Joined: Feb 2013
Reputation: 0
Post: #2
RE: Disable voicemail beep with old configuration files
(05-30-2013 09:00 PM)jcaruso Wrote:  I was going to post a question requesting how to disable the voicemail tones on a T-26 if using the old provisioning configuration files, but I just figured it out. So instead I'll share my solution if anyone is having the same issue.

We upgraded the phones to the latest firmware before V70. For the T-26 it was 6.61.23.16. After that I went into the individual MAC.cfg file for the phone and under [Features] I added VoiceMailTone = 0

This line disabled the voicemail beep without having to modify the tone settings, stutter, etc.


And for those looking for the new format for provisioning like I was:
Under ###Voice### section

voice.tone.dial =
voice.tone.ring =
voice.tone.busy =
voice.tone.congestion =
voice.tone.callwaiting =
voice.tone.dialrecall =
voice.tone.record=
voice.tone.info =
voice.tone.stutter =
voice.tone.message = 0
voice.tone.autoanswer =
09-25-2013 03:45 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  How to disable Voicemail from .cfg in auto provisioning file? boniakowski 2 1,316 09-19-2023 12:03 AM
Last Post: boniakowski
  DTAF files for T31P on BroadSoft erictam 2 6,563 01-17-2023 05:08 PM
Last Post: toddcarson
  Encrypted Configuration and WebItemsLevel.cfg Jonn 0 1,435 01-01-2023 09:09 AM
Last Post: Jonn
  W73P Custom Handset Config to Disable Noise Cancellation vikramgupte 2 2,965 10-25-2022 07:37 AM
Last Post: vikramgupte
  Loading the configuration every time after reboot goodtm 1 2,990 05-19-2022 05:20 PM
Last Post: complex1
  Yealink T54W - disable wifi from template itops@vivcourt.com 2 5,210 01-25-2022 10:32 AM
Last Post: itops@vivcourt.com
  disable provisioning on T26P yeaphild 0 4,523 02-25-2021 07:25 PM
Last Post: yeaphild
  AutoP vs refresh configuration mattf 0 4,090 01-23-2021 10:42 AM
Last Post: mattf
  Disable long Press of DSS Jive_VoIP 2 7,502 07-23-2020 02:08 AM
Last Post: Jive_VoIP
  Remote configuration overwriting local configuration cdesbouche 1 7,033 04-11-2020 05:58 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication