[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ring tone
Author Message
nicolinux Offline
Junior Member
**

Posts: 2
Joined: May 2013
Reputation: 0
Post: #1
Ring tone
Hello, i have a few T20P yealink phone and a Yeastar Mypbx. I have configured the contact in each phone, putting all the extensions in a group named "work".
After that i have given to the this group a different ring tone, ring6.
When an extension calls another extension the phone use the proper tone (ring6) and when there is an external inbound call the phone is using the default tone, ring2.
The problem arise when userA answer to an external phone call and wanto to tranfer it to userB. UserB's phone is ringing using the default tone (ring2) and not the group tone (ring6).
In a few word, the customer woud like do know if the incoming call is an internal call or is an external call been transferred
can you help me ?
Nico
(This post was last modified: 05-24-2013 03:06 PM by nicolinux.)
05-24-2013 03:03 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 24
Post: #2
RE: Ring tone
Hi Nico,
1. Here i tested at my side, and it works well.
2. Did you add this external number to your group? If this number is in your group, there will no problem.
3. What's the firmware are you using? Could you upgrade to latest firmware 9..70.0.140
http://www.yealink.com/Upload/firmware/T....0.140.zip
4. You can also access to the webpage-Account-Advanced, disabled Distinctive Ring tones and check again.

5. If the problem is still, please send me the config.bin file, and tell me which extensions have the problem.
Access to the phone webpage-Upgrade-Advanced

Thanks.
05-25-2013 11:14 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  WH67 Headset - DOES NOT RING IN EAR ON INCOMING CALL GlasairII 1 1,739 03-31-2022 02:53 AM
Last Post: Yisroel_MongoTEL
Brick Yealink t29G | 5 seconds ring delay amichy 2 7,934 08-31-2020 11:08 PM
Last Post: gmanual
  Low intercom tone volume haukzinn 0 2,869 07-18-2020 08:27 PM
Last Post: haukzinn
  T23G different ring when transferring Jorge12 1 4,389 06-01-2018 07:25 AM
Last Post: anonymous1675184009882
  SIP-T26P no audible ring when receiving a call from another extension proof 1 4,790 05-30-2018 06:05 AM
Last Post: Evan_Yealink
  Paging Tone ChTanzer 1 6,001 09-21-2017 09:40 AM
Last Post: Karl_Yealink
  Disabled Keypad Tone - YEALINK T28P janduy.manzanos@gmail.com 10 25,802 05-16-2017 04:14 PM
Last Post: jolouis
  Multicast paging tone sunstatetech 3 9,810 05-04-2017 07:23 PM
Last Post: GIWM
  Ring on Busy Eldon 5 11,800 03-16-2017 07:29 PM
Last Post: Patrick Hogan
  Search contact when phone ring via Remote Phonebook ccy 2 10,587 06-23-2016 08:22 PM
Last Post: jmoore

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication