[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
W56H with T53W via DD10 troubleshooting
Author Message
business@voxclear.com Offline
Junior Member
**

Posts: 3
Joined: Jan 2024
Reputation: 1
Post: #1
W56H with T53W via DD10 troubleshooting
I've been using for a couple years two W56H handsets connected to a T53W/DD10 combo. I cannot recall exactly how that all came together but it was rock solid until now. Neither W56H can find the Base to register to, so I am suspecting the DD10 is the issue. Looking at the T53W web gui, should something show up there when the DD10 is connected to USB port? Should I just purchase another DD10 or are there some other troubleshooting steps to try first?

thx

EDIT: now I am beginning to suspect the USB port on the T53W is at fault. Connecting a Yealink headset directly to that, not working. Troubleshooting steps for that?
(This post was last modified: 07-11-2024 03:14 AM by business@voxclear.com.)
07-11-2024 03:04 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,546
Joined: Jan 2014
Reputation: 48
Post: #2
RE: W56H with T53W via DD10 troubleshooting
(07-11-2024 03:04 AM)business@voxclear.com Wrote:  I've been using for a couple years two W56H handsets connected to a T53W/DD10 combo. I cannot recall exactly how that all came together but it was rock solid until now. Neither W56H can find the Base to register to, so I am suspecting the DD10 is the issue. Looking at the T53W web gui, should something show up there when the DD10 is connected to USB port? Should I just purchase another DD10 or are there some other troubleshooting steps to try first?

thx

EDIT: now I am beginning to suspect the USB port on the T53W is at fault. Connecting a Yealink headset directly to that, not working. Troubleshooting steps for that?

Hi,

Before you buy a new DD10K, you can try resetting the phone to factory settings first, which will cost you nothing.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
07-11-2024 03:31 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
business@voxclear.com Offline
Junior Member
**

Posts: 3
Joined: Jan 2024
Reputation: 1
Post: #3
RE: W56H with T53W via DD10 troubleshooting
(07-11-2024 03:31 AM)complex1 Wrote:  
(07-11-2024 03:04 AM)business@voxclear.com Wrote:  I've been using for a couple years two W56H handsets connected to a T53W/DD10 combo. I cannot recall exactly how that all came together but it was rock solid until now. Neither W56H can find the Base to register to, so I am suspecting the DD10 is the issue. Looking at the T53W web gui, should something show up there when the DD10 is connected to USB port? Should I just purchase another DD10 or are there some other troubleshooting steps to try first?

thx

EDIT: now I am beginning to suspect the USB port on the T53W is at fault. Connecting a Yealink headset directly to that, not working. Troubleshooting steps for that?

Hi,

Before you buy a new DD10K, you can try resetting the phone to factory settings first, which will cost you nothing.

Did that, no joy. Now networking not working!
07-12-2024 05:06 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,546
Joined: Jan 2014
Reputation: 48
Post: #4
RE: W56H with T53W via DD10 troubleshooting
(07-12-2024 05:06 AM)business@voxclear.com Wrote:  
(07-11-2024 03:31 AM)complex1 Wrote:  
(07-11-2024 03:04 AM)business@voxclear.com Wrote:  I've been using for a couple years two W56H handsets connected to a T53W/DD10 combo. I cannot recall exactly how that all came together but it was rock solid until now. Neither W56H can find the Base to register to, so I am suspecting the DD10 is the issue. Looking at the T53W web gui, should something show up there when the DD10 is connected to USB port? Should I just purchase another DD10 or are there some other troubleshooting steps to try first?

thx

EDIT: now I am beginning to suspect the USB port on the T53W is at fault. Connecting a Yealink headset directly to that, not working. Troubleshooting steps for that?

Hi,

Before you buy a new DD10K, you can try resetting the phone to factory settings first, which will cost you nothing.

Did that, no joy. Now networking not working!

Hi,

If the phone is powered by PoE, I suggest using a separate power supply.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
07-12-2024 07:05 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
business@voxclear.com Offline
Junior Member
**

Posts: 3
Joined: Jan 2024
Reputation: 1
Post: #5
RE: W56H with T53W via DD10 troubleshooting
95% sure the USB port on this phone is shot. Nothing works connected to it.
07-30-2024 07:28 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Can't upgrade T53W valentinP 3 3,238 11-14-2023 09:29 PM
Last Post: nolto
  T53W being prompt to push button before call is connected M1IT Support 0 1,452 11-06-2023 01:03 PM
Last Post: M1IT Support
  T53W Diagnostic Log Password testlabuser2015 0 2,398 02-03-2023 03:56 AM
Last Post: testlabuser2015
  T53W, USB port ctsmetrony 2 3,695 10-28-2022 07:17 PM
Last Post: ctsmetrony
  T53W, USB flash drive format ctsmetrony 0 2,098 10-19-2022 09:20 PM
Last Post: ctsmetrony
  T53W - entry of symbols from keypad? jhaFF 5 9,585 07-08-2022 12:15 AM
Last Post: Yisroel_MongoTEL
  T53W Recovery Rayfield 0 2,564 06-01-2022 03:37 AM
Last Post: Rayfield
  T53W Unable to set Multicast Listening parameters atlasvending@gmail.com 7 11,476 02-25-2022 12:25 AM
Last Post: complex1
  T53W - Inter Digit setting on W56H slave dcfindlay 2 7,562 04-24-2021 07:34 PM
Last Post: complex1
  T53W not accepting config_dsskey_length? Did this get removed? tima 2 7,516 03-27-2021 06:19 AM
Last Post: wpajack

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication