[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48U BLF show line status for selected users
Author Message
integral Offline
Junior Member
**

Posts: 2
Joined: Mar 2019
Reputation: 0
Post: #1
T48U BLF show line status for selected users
Hello,

Customer asked me about ability to show BLF line status only for selected users (on Yealink T48U screen), AND BLF line status should not been shown on other (not selected) users IP Phone screen (Yealink T48U). Phones are conected to 3CX.

Current status:
Each user can assign the function of the DSS button on the IP Phone screen in such a way that he has the ability to add a BLF button.

This results BLF in showing line status (e.g. busy, free, ringing) of any subscriber.

Anticipation:
The above functionality works only for a specific group of users. [not see line status on every user]

Please let me know is it possible to achieve such functionality and how ?
Is it possible to block selecting BLF by loading Template ?
07-16-2023 05:24 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,488
Joined: Jan 2014
Reputation: 43
Post: #2
RE: T48U BLF show line status for selected users
(07-16-2023 05:24 PM)integral Wrote:  Hello,

Customer asked me about ability to show BLF line status only for selected users (on Yealink T48U screen), AND BLF line status should not been shown on other (not selected) users IP Phone screen (Yealink T48U). Phones are conected to 3CX.

Current status:
Each user can assign the function of the DSS button on the IP Phone screen in such a way that he has the ability to add a BLF button.

This results BLF in showing line status (e.g. busy, free, ringing) of any subscriber.

Anticipation:
The above functionality works only for a specific group of users. [not see line status on every user]

Please let me know is it possible to achieve such functionality and how ?
Is it possible to block selecting BLF by loading Template ?

Hi,

I think this question belongs more on the 3CX forum than on the Yealink forum, because the phones are fully provisioned by 3CX, after which adjustments are not really possible anymore.
You could adjust the template, but then you have no support from 3CX if something no longer works.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
07-17-2023 12:39 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
integral Offline
Junior Member
**

Posts: 2
Joined: Mar 2019
Reputation: 0
Post: #3
RE: T48U BLF show line status for selected users
Hello

Thank you for reply. 3CX do not support custom phone temaplate, they support just their standard template: https://www.3cx.com/docs/blf/

We use custom template for phone adjustment and we look for solution to provide block of BLF use from Yealink T48U side.

We want to block Yealink user from selecting DDS touch BLF (hide BLF to select from level of touch Yealink menu). Is it possible ?

Thanks.

(07-17-2023 12:39 AM)complex1 Wrote:  
(07-16-2023 05:24 PM)integral Wrote:  Hello,

Customer asked me about ability to show BLF line status only for selected users (on Yealink T48U screen), AND BLF line status should not been shown on other (not selected) users IP Phone screen (Yealink T48U). Phones are conected to 3CX.

Current status:
Each user can assign the function of the DSS button on the IP Phone screen in such a way that he has the ability to add a BLF button.

This results BLF in showing line status (e.g. busy, free, ringing) of any subscriber.

Anticipation:
The above functionality works only for a specific group of users. [not see line status on every user]

Please let me know is it possible to achieve such functionality and how ?
Is it possible to block selecting BLF by loading Template ?

Hi,

I think this question belongs more on the 3CX forum than on the Yealink forum, because the phones are fully provisioned by 3CX, after which adjustments are not really possible anymore.
You could adjust the template, but then you have no support from 3CX if something no longer works.
07-17-2023 12:51 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48S DSS softkeys can only show two at at time afogul 0 351 12-09-2023 05:50 AM
Last Post: afogul
  T48U BLF Park Call not working timotel 0 707 09-20-2023 07:20 AM
Last Post: timotel
  Red Triangle Icon in status KNERD 1 11,071 09-06-2023 12:13 AM
Last Post: JohnJ
  T48U Custom Firmware Upgrade to Official Friendly 0 1,745 03-29-2023 01:20 AM
Last Post: Friendly
  T48 - DTMF not working when DSS keys are selected Freek Mooij 4 10,825 11-07-2022 12:53 AM
Last Post: rromano
  Locking down buttons/No Line select blmarsa 0 1,096 10-06-2022 09:23 AM
Last Post: blmarsa
  T43U_BLF Like Key randomly changes to Line key Type DND Balavan 0 1,475 08-19-2022 09:37 PM
Last Post: Balavan
  T48U 'transfer.dsskey_deal_type' issue srcenturic 0 1,826 06-27-2022 02:52 PM
Last Post: srcenturic
  cannot transfer to Park line button srcenturic 0 1,701 06-10-2022 01:41 AM
Last Post: srcenturic
  How to show caller Phone Number when call is forwarded gijoe 0 1,933 05-31-2022 07:40 PM
Last Post: gijoe

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication