[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Multicast Paging And SIP Call
Author Message
nolto Offline
Junior Member
**

Posts: 31
Joined: Feb 2020
Reputation: 0
Post: #1
Multicast Paging And SIP Call
Hello,
A customer of ours wants to broadcast continuous paging to Yealink IP Phones. However, when Paging is active if the phone is called, it does not ring, it only generates a warning in the background, as in the "call waiting" feature.

Is there a way to make a ringtone when the phone receives a call while the paging is broadcasting?
Also, can it be enabled to automatically continue paging when the call disconnect?

Thanks in advance.

Emre Ö.
Co-founder Nolto Bilişim
Yeastar Distributor / Yealink Re-seller
09-23-2022 08:05 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
testlabuser2015 Offline
Junior Member
**

Posts: 7
Joined: Dec 2015
Reputation: 0
Post: #2
RE: Multicast Paging And SIP Call
Hello,

I would check out the options at Features > Intercom , as these would need to be adjusted. What you're hearing is the "Intercom Tone" It enables or disables the phone to play a warning tone when answering an intercom call, in your case, the tone is played in the background because due to the fact that "Intercom Tone" is enabled but "Intercom Barge" is disabled.

As for changing it to a ring tone, there is no means that I'm aware of, but it can be changed to the call waiting tone via the following.
features.intercom.tone > set to 1
voice.intercom.tone_vol > set to 1
09-24-2022 09:41 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Initiating a call on pc using the device for the conversation wilcotroost 1 465 01-17-2023 07:19 PM
Last Post: nolto
  T33G Multicast stratos 2 663 11-18-2022 09:45 PM
Last Post: stratos
  MP56 Locking While on a Teams Call jvelasquez 0 297 11-15-2022 01:18 AM
Last Post: jvelasquez
  How to call with Yealink MP54 Teams edition Danielelawan 1 791 10-18-2022 04:24 PM
Last Post: Gunnyma
  Multicast Stops Working until Phone Rebooted Blake1 9 4,030 10-15-2022 12:04 AM
Last Post: jedhcrs
  Yealink loses network during a call jardelp90 2 1,378 08-05-2022 09:26 PM
Last Post: Chris708
  xml push beep when on call jimk4484 0 653 07-08-2022 03:39 AM
Last Post: jimk4484
  W90DM annoying hum , crackles during call reed 3 1,869 06-23-2022 09:23 PM
Last Post: reed
  Headset auto answer waiting call T43U and WH62 TravisD 3 2,104 06-21-2022 11:58 AM
Last Post: TravisD
  WH67 Headset - DOES NOT RING IN EAR ON INCOMING CALL GlasairII 1 1,720 03-31-2022 02:53 AM
Last Post: Yisroel_MongoTEL

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication