[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Thread Closed 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T42S unable to update firmware
Author Message
brianstoiber Offline
Junior Member
**

Posts: 2
Joined: Aug 2022
Reputation: 0
Post: #1
T42S unable to update firmware
I have multiple T42S SIP phones. They were on an old firmware version (66.83.0.30) and needed to upgrade them as I am moving our service to 3CX. I need to get to 66.86.0.5.

I have been able to upgrade the firmware to 66.84.0.35 but I can't get them any farther than that. Every time I try to upgrade them, I get an error saying

Update failed(-5)

or they will say

Firmware updating...
Do not power off!
Unable to complete.
Will try again now!


Any help on what I need to do?
08-24-2022 03:15 AM
Find all posts by this user    like0    dislike0
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,549
Joined: Jan 2014
Reputation: 48
Post: #2
RE: T42S unable to update firmware
(08-24-2022 03:15 AM)brianstoiber Wrote:  I have multiple T42S SIP phones. They were on an old firmware version (66.83.0.30) and needed to upgrade them as I am moving our service to 3CX. I need to get to 66.86.0.5.

I have been able to upgrade the firmware to 66.84.0.35 but I can't get them any farther than that. Every time I try to upgrade them, I get an error saying

Update failed(-5)

or they will say

Firmware updating...
Do not power off!
Unable to complete.
Will try again now!


Any help on what I need to do?

Hi,

Please reset the phone to factory default and try again.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
08-24-2022 05:41 PM
Find all posts by this user    like0    dislike0
brianstoiber Offline
Junior Member
**

Posts: 2
Joined: Aug 2022
Reputation: 0
Post: #3
RE: T42S unable to update firmware
I have already tried that. I think I need to remove the MAC from the current provider so that it doesn't automatically try to provision itself as soon as it is powered on.

Maybe?
08-24-2022 09:25 PM
Find all posts by this user    like0    dislike0
oliv Offline
Member
***

Posts: 92
Joined: Feb 2016
Reputation: 1
Post: #4
RE: T42S unable to update firmware
I tried to update a T42S from 66.85.0.5 to 66.86.0.15 using web interface.
I followed the steps bellow:

1. download 66.86.0.15.rom file from Yealink web site
2. select downloaded file after clicking over Browse button
3. click over Update button
4. observe a message like Updating firmware over phone's screen

After 15 minutes, I pulled the phone patch cord and replugged it: it restarted with 66.85.0.5 version.

1. Which 66.86.0.x version shall I target first ?
2. Which 66.86.0.x version shall I target after the first one reached ?
09-29-2022 07:45 PM
Find all posts by this user    like0    dislike0
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,549
Joined: Jan 2014
Reputation: 48
Post: #5
RE: T42S unable to update firmware
(09-29-2022 07:45 PM)oliv Wrote:  I tried to update a T42S from 66.85.0.5 to 66.86.0.15 using web interface.
I followed the steps bellow:

1. download 66.86.0.15.rom file from Yealink web site
2. select downloaded file after clicking over Browse button
3. click over Update button
4. observe a message like Updating firmware over phone's screen

After 15 minutes, I pulled the phone patch cord and replugged it: it restarted with 66.85.0.5 version.

1. Which 66.86.0.x version shall I target first ?
2. Which 66.86.0.x version shall I target after the first one reached ?

Hi,

The steps you are taking are good.
Devices with v85 firmware can be upgraded directly to firmware v86.

After the firmware upgrade is complete, you may want to check that the phone actually has the latest firmware before removing and reconnecting the phone patch cord.

If the phone contains the correct firmware before the restart, the problem lies in a remote firmware update via RPS that provides the device with the older firmware v85 again.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
09-29-2022 09:50 PM
Find all posts by this user    like0    dislike0
oliv Offline
Member
***

Posts: 92
Joined: Feb 2016
Reputation: 1
Post: #6
RE: T42S unable to update firmware
(09-29-2022 09:50 PM)complex1 Wrote:  
(09-29-2022 07:45 PM)oliv Wrote:  I tried to update a T42S from 66.85.0.5 to 66.86.0.15 using web interface.
I followed the steps bellow:

1. download 66.86.0.15.rom file from Yealink web site
2. select downloaded file after clicking over Browse button
3. click over Update button
4. observe a message like Updating firmware over phone's screen

After 15 minutes, I pulled the phone patch cord and replugged it: it restarted with 66.85.0.5 version.

1. Which 66.86.0.x version shall I target first ?
2. Which 66.86.0.x version shall I target after the first one reached ?

Hi,

The steps you are taking are good.
Devices with v85 firmware can be upgraded directly to firmware v86.

After the firmware upgrade is complete, you may want to check that the phone actually has the latest firmware before removing and reconnecting the phone patch cord.

If the phone contains the correct firmware before the restart, the problem lies in a remote firmware update via RPS that provides the device with the older firmware v85 again.

How long should an 85 to 86 upgrade last ?
I aborted mine after 15 minutes or so as usually, an upgrade takes 3 to 5 minutes.

Replying to myself, using a provisioning server where I copied the firmware file, i could positively upgrade my T42S phone to v86.
The whole process took around 3 minutes.
What instantly changed is:
- I could see file downloading progress (10 to 20s)
- then the usual message warning against unplugging the phone.

Strange.
Thank very much complex1 for your help.
(This post was last modified: 09-30-2022 03:17 PM by oliv.)
09-30-2022 02:29 PM
Find all posts by this user    like0    dislike0
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,549
Joined: Jan 2014
Reputation: 48
Post: #7
RE: T42S unable to update firmware
(09-30-2022 02:29 PM)oliv Wrote:  
(09-29-2022 09:50 PM)complex1 Wrote:  
(09-29-2022 07:45 PM)oliv Wrote:  I tried to update a T42S from 66.85.0.5 to 66.86.0.15 using web interface.
I followed the steps bellow:

1. download 66.86.0.15.rom file from Yealink web site
2. select downloaded file after clicking over Browse button
3. click over Update button
4. observe a message like Updating firmware over phone's screen

After 15 minutes, I pulled the phone patch cord and replugged it: it restarted with 66.85.0.5 version.

1. Which 66.86.0.x version shall I target first ?
2. Which 66.86.0.x version shall I target after the first one reached ?

Hi,

The steps you are taking are good.
Devices with v85 firmware can be upgraded directly to firmware v86.

After the firmware upgrade is complete, you may want to check that the phone actually has the latest firmware before removing and reconnecting the phone patch cord.

If the phone contains the correct firmware before the restart, the problem lies in a remote firmware update via RPS that provides the device with the older firmware v85 again.

How long should an 85 to 86 upgrade last ?
I aborted mine after 15 minutes or so as usually, an upgrade takes 3 to 5 minutes.

Replying to myself, using a provisioning server where I copied the firmware file, i could positively upgrade my T42S phone to v86.
The whole process took around 3 minutes.
What instantly changed is:
- I could see file downloading progress (10 to 20s)
- then the usual message warning against unplugging the phone.

Strange.
Thank very much complex1 for your help.

Good to read that you were able to upgrade the firmware.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
09-30-2022 05:31 PM
Find all posts by this user    like0    dislike0
Thread Closed 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Unable to update Firmware from 66.83.0.55 Tularis 0 626 09-19-2024 09:11 PM
Last Post: Tularis
  newest firmware for T4XS units causes bootup loop davedogmoore@gmail.com 6 5,373 09-19-2024 03:12 PM
Last Post: Masyn_Yealink
  Auto Provision Firmware stratos 3 12,606 06-24-2024 05:10 PM
Last Post: wuesten_fuchs
  Firmware Upgrade T46S not working SamSam 3 3,072 06-05-2024 01:25 AM
Last Post: augicom
  SIP-T46G Need firmware update instructions RobbyK 2 3,370 01-11-2024 10:52 PM
Last Post: RobbyK
Question SMS/Text Auto Reply on T42S tcodispot 0 1,353 01-09-2024 03:51 AM
Last Post: tcodispot
  Firmware T42s Raimundo 1 3,297 11-23-2023 06:45 PM
Last Post: Darsh
  T46U + EXP43 Stuck on Welcome Screen after update danantonielli 2 6,388 10-06-2023 10:04 PM
Last Post: roland@simplicloud.co.za
  T41S FIRMWARE 66.9.0.80 vers 66.86.0.5 DANJEAN 1 3,631 08-23-2023 01:00 AM
Last Post: complex1
  Model T42s and T42g, the speakerphone is enable on incoming calls Lissvazquez 6 5,947 07-28-2023 10:27 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication