[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
‘New’ W56/W60B default admin password not recognised?
Author Message
Russ1 Offline
Junior Member
**

Posts: 2
Joined: Aug 2022
Reputation: 0
Post: #1
‘New’ W56/W60B default admin password not recognised?
Hi folks,

I’ve just had FTTP installed and switching my home lines over to VOIP. In preparation I’ve bought a W56/W60B handset/base combination.

I’ve just plugged it in and after downloading the latest firmware I found I could make/receive calls straight away (from a UK geographic number)!

Also the web interface doesn’t recognise the default admin user/password.

Does this mean I have been supplied a device that has been pre-configured for somebody else?

Thanks
Russ
(This post was last modified: 08-06-2022 03:44 AM by Russ1.)
08-06-2022 03:43 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,334
Joined: Jan 2014
Reputation: 39
Post: #2
RE: ‘New’ W56/W60B default admin password not recognised?
(08-06-2022 03:43 AM)Russ1 Wrote:  Hi folks,

I’ve just had FTTP installed and switching my home lines over to VOIP. In preparation I’ve bought a W56/W60B handset/base combination.

I’ve just plugged it in and after downloading the latest firmware I found I could make/receive calls straight away (from a UK geographic number)!

Also the web interface doesn’t recognise the default admin user/password.

Does this mean I have been supplied a device that has been pre-configured for somebody else?

Thanks
Russ

Hi,

Normally it is not possible to make calls with a new device immediately. The device must be programmed first.
You probably bought a 'new' device that is still registered to a previous user.
You will have to contact the seller and ask them to fix it.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
08-07-2022 01:14 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Russ1 Offline
Junior Member
**

Posts: 2
Joined: Aug 2022
Reputation: 0
Post: #3
RE: ‘New’ W56/W60B default admin password not recognised?
Hi Frank,

Many thanks for your reply.

I’m wondering if this phone perhaps was part of a pre-configured bundle for a corporate customer that has then “recycled” its unused equipment?

I’ve been in contact with the seller and they will send me out another device tomorrow so we’ll see if that works.

Thanks
Russ.
08-07-2022 02:44 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W60B remove intercom when transfert MYCOMPUTING 0 69 11-24-2022 10:43 PM
Last Post: MYCOMPUTING
  W60B emitting high-pitched noise msncookie 6 6,288 09-19-2022 08:39 PM
Last Post: RobFromSouthJersey
  All handsets on the same W60B loose registration after many attempts to register Alvaro Gutierrez 1 4,064 06-23-2022 09:56 PM
Last Post: rdurham
  W60B and W56H - can you PIN lock the phones,.. ? Haniel 2 6,079 06-18-2022 01:29 AM
Last Post: Beachnuttz
  Connecting WH66 to W60B aaronl 1 2,719 06-09-2022 10:00 PM
Last Post: markvdheijden
  Ring Tone Troube with W60B Zieschank_GmbH 1 1,597 04-13-2022 04:02 PM
Last Post: complex1
  recovery mode W60B files Aleskey 1 1,683 04-09-2022 02:42 AM
Last Post: 88fingerslukee
  W60B base firmware downgrade RingCentral brewginger 2 2,814 01-18-2022 12:58 AM
Last Post: brewginger
  Urgent - Help needed - W60B & W53H problems - firmware - connection - etc groenebeek 1 2,910 01-07-2022 06:16 PM
Last Post: complex1
  W60B Compromised and unable to factory reset socialtelecoms 3 4,095 01-07-2022 12:22 AM
Last Post: Yisroel_MongoTEL

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication