[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
W57r DECT handset using emergency alarm button as speed dial
Author Message
Upcraft Offline
Junior Member
**

Posts: 2
Joined: Feb 2017
Reputation: 1
Post: #1
Information W57r DECT handset using emergency alarm button as speed dial
This is an FYI , tip post.
Just got one of the DECT W57r model handsets. I noticed it has this emergency dial button on the top of the phone but out of the box with 3cx it was not configured to do anything. A common complaint with the DECT phones is they have no BLF features which is understandable given the small size, but unfortunate.

I found I can use this emergency alarm button as a hard speed dial button. In my case, we are not going to use it for emergency calling, but instead I want it to speed dial the Shared Parking extension to pickup a call someone else has placed on park more easily.

So I go into the base station configuration under
Features->Alarm
I edit the first template and call it Park0
Alarm type: Button
Trigger delay: 1 (cannot be 0)
Leave the rest default

Next I go to Account->Alarm assignment
Pick the handset from drop down,
Set Alarm number to the dummy extension I created in 3cx that forwards to SP0
(I cannot get the phone to dial SP0 directly as it will not send the alpha characters from what I can tell)

So in 3cx the common hack is to create an extension and change the forwarding options to forward to number "SP0" or SP1, SP2 etc. I create an extension like 000 or 001 etc fowarding to those lines to make calling or transferring to shared park easier from DECT, mobile app, and ATA devices.

The one concern I had was if autoprovisioning in 3cx would overwrite this setting. At this time it appears the 3cx provisioning template does not overwrite this setting though at any time a future update of the 3cx templates might add these items to their provisioning template which could cause the setting to stop working. But for now pressing Auto Provision did not overwrite these manual settings of the base station.
(This post was last modified: 07-07-2022 04:04 AM by Upcraft.)
07-07-2022 04:03 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T33G paging - can't program paging button cecilia.dellaria@statewide.com 1 4,246 03-01-2022 01:47 AM
Last Post: complex1
  DECT W60P with W80M & W80B / Loudspeaker volume ohaldi 0 3,115 01-05-2022 05:26 PM
Last Post: ohaldi
  T54W voicemail button function urthllc 4 18,812 05-06-2020 02:43 PM
Last Post: urthllc
  T46S Factory Default OK button does not work dkirk 0 7,004 02-06-2019 02:09 PM
Last Post: dkirk
  [W52P+W56P] Same base station with with different handset models - Auto-provisioning Asanka 5 20,582 08-25-2017 02:21 PM
Last Post: SteveDavies
  IP Phones cannot dial out shadysharrison 2 12,359 06-22-2016 07:51 PM
Last Post: jmoore
  t38G loud buzzing noise in handset flinty 3 12,608 05-30-2016 02:25 AM
Last Post: flinty
  T4x DND Emergency issues max 2 9,192 04-11-2016 07:51 PM
Last Post: mkeuter
  T23G same as T23P except speed? boblink 1 9,001 02-26-2016 12:13 AM
Last Post: James_Yealink
  Dial a number just by lifting the handset Abe1048 1 15,254 12-08-2015 04:39 AM
Last Post: Karl_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication