[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
W60 connectivity and audio issues
Author Message
shadokkhan Offline
Junior Member
**

Posts: 3
Joined: May 2022
Reputation: 0
Post: #1
W60 connectivity and audio issues
I have a strange and intermittent problem problem with w60 phones , I need some advice as to what could be causng thes issues:

1)The phones registered but when making a call there is no audio on the call once answered . If base is rebooted then calls are fine again , this happens randomly.
2) In some cases if I call the phone I get ringback on calling side and the phone does not even ring at all , yet it will be registered also happens randomly to resolve I also have to reboot the base and sometimes have to give it a new IP for it to work.

This is being experienced at 2 different sites both with Base firmware 77.85.0.20 and handset firmware 61.85.0.20. The one site the phones register directly to the provider and on the other they are behind a PBX . There are ither Yealink IP desk phones within these sites and they dont have any issues only the w60s are experiencing this problem.
05-05-2022 12:47 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,549
Joined: Jan 2014
Reputation: 48
Post: #2
RE: W60 connectivity and audio issues
(05-05-2022 12:47 AM)shadokkhan Wrote:  I have a strange and intermittent problem problem with w60 phones , I need some advice as to what could be causng thes issues:

1)The phones registered but when making a call there is no audio on the call once answered . If base is rebooted then calls are fine again , this happens randomly.
2) In some cases if I call the phone I get ringback on calling side and the phone does not even ring at all , yet it will be registered also happens randomly to resolve I also have to reboot the base and sometimes have to give it a new IP for it to work.

This is being experienced at 2 different sites both with Base firmware 77.85.0.20 and handset firmware 61.85.0.20. The one site the phones register directly to the provider and on the other they are behind a PBX . There are ither Yealink IP desk phones within these sites and they dont have any issues only the w60s are experiencing this problem.

Hi,

Reading the first part of your post (Q1 and Q2) I would almost say you have a problem with the router closing ports over time due to traffic safety.

What you can try is to enable the STUN feature of the base station so that the ports are not closed.

By rebooting the base station or by giving it a different IP address, the base station opens the correct ports again so that you can make and receive calls.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
05-05-2022 10:58 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
shadokkhan Offline
Junior Member
**

Posts: 3
Joined: May 2022
Reputation: 0
Post: #3
RE: W60 connectivity and audio issues
(05-05-2022 10:58 PM)complex1 Wrote:  
(05-05-2022 12:47 AM)shadokkhan Wrote:  I have a strange and intermittent problem problem with w60 phones , I need some advice as to what could be causng thes issues:

1)The phones registered but when making a call there is no audio on the call once answered . If base is rebooted then calls are fine again , this happens randomly.
2) In some cases if I call the phone I get ringback on calling side and the phone does not even ring at all , yet it will be registered also happens randomly to resolve I also have to reboot the base and sometimes have to give it a new IP for it to work.

This is being experienced at 2 different sites both with Base firmware 77.85.0.20 and handset firmware 61.85.0.20. The one site the phones register directly to the provider and on the other they are behind a PBX . There are ither Yealink IP desk phones within these sites and they dont have any issues only the w60s are experiencing this problem.

Hi,

Reading the first part of your post (Q1 and Q2) I would almost say you have a problem with the router closing ports over time due to traffic safety.

What you can try is to enable the STUN feature of the base station so that the ports are not closed.

By rebooting the base station or by giving it a different IP address, the base station opens the correct ports again so that you can make and receive calls.


Thank you for the info I will give this a try
05-06-2022 01:14 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
shadokkhan Offline
Junior Member
**

Posts: 3
Joined: May 2022
Reputation: 0
Post: #4
RE: W60 connectivity and audio issues
(05-05-2022 10:58 PM)complex1 Wrote:  
(05-05-2022 12:47 AM)shadokkhan Wrote:  I have a strange and intermittent problem problem with w60 phones , I need some advice as to what could be causng thes issues:

1)The phones registered but when making a call there is no audio on the call once answered . If base is rebooted then calls are fine again , this happens randomly.
2) In some cases if I call the phone I get ringback on calling side and the phone does not even ring at all , yet it will be registered also happens randomly to resolve I also have to reboot the base and sometimes have to give it a new IP for it to work.

This is being experienced at 2 different sites both with Base firmware 77.85.0.20 and handset firmware 61.85.0.20. The one site the phones register directly to the provider and on the other they are behind a PBX . There are ither Yealink IP desk phones within these sites and they dont have any issues only the w60s are experiencing this problem.

Hi,

Reading the first part of your post (Q1 and Q2) I would almost say you have a problem with the router closing ports over time due to traffic safety.

What you can try is to enable the STUN feature of the base station so that the ports are not closed.

By rebooting the base station or by giving it a different IP address, the base station opens the correct ports again so that you can make and receive calls.

Hi complex1 , I am a bit limited on networking if I share a pcap will you be able to see this and confirm ?
05-06-2022 08:26 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,549
Joined: Jan 2014
Reputation: 48
Post: #5
RE: W60 connectivity and audio issues
(05-06-2022 08:26 PM)shadokkhan Wrote:  Hi complex1 , I am a bit limited on networking if I share a pcap will you be able to see this and confirm ?

Hi,

My service doesn't go that far, sorry. I therefore suggest that you contact your local (company) network specialist for this.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
05-06-2022 10:49 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W70B network issues assistenza@voispeed.com 4 6,357 04-19-2024 08:53 PM
Last Post: assistenza@voispeed.com
  Volume issues pdjhh 0 1,291 01-10-2024 02:26 PM
Last Post: pdjhh
  Problems setting up W60B and interface issues Ness 4 8,664 03-30-2023 05:24 PM
Last Post: Ness
  W60P Key Lock Issues Pettis 1 4,152 01-20-2022 08:55 PM
Last Post: complex1
  Audio delay when call answered tjwesto 4 13,507 09-15-2020 01:56 PM
Last Post: complex1
  Strange audio PDJ 1 5,137 05-01-2019 01:46 PM
Last Post: PDJ
  german translation issues W56h handset woodgee 8 21,744 07-26-2018 07:04 PM
Last Post: woodgee

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication