[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46 - Program Message Button for a Help call?
Author Message
harrys Offline
Junior Member
**

Posts: 5
Joined: Mar 2022
Reputation: 0
Post: #1
T46 - Program Message Button for a Help call?
Two questions please

1. Is it possible to program the Message button to dial an extension or dial out rather then default to message function?

2. IS there a way for this button (or if not, any button) to call a group of extension with a Call for help message,

Essentially we need a discrete panic button that will alert others in the building that help is needed.
- When the button is pressed no ringing or sounds should be made
-The group of receiving extension need to have a loud and imposing ringtone and message and must show the room the button was pressed in. It must not allow open two way chatting though as if the button is pressed by accident , a private conversation would be overheard.

Any suggestion on how this could be set up.


ADDENDUM
OK, So it was pretty easy to do in case anyone else wants to know. We dont use voice messages.

1. Setup the yeahlink to have Vocce message off (no voice message extension setup)
2. Set up an IVR on the cloud or onsite PBX with 1 min of no sound audio (can download the .wav file). The IVR is labled as HELP. The IVR should immediatly ring a call que with the phones that need to ring when help is needed. One of the phones in the que group is a loud ringer and flashing light (Buy it from Amazon)

When the IVR is triggered the phones ring with the caller ID showing as IVR name (HELP) and the Room location. THe extension with the loud ringer and lght notifies everyone at front reception.

When the Yeahlink Message button is pressed for the first time it asks for the Voice message dial extension, instead of adding the voice message no, add and save the Help IVR number.

From now on when in trouble the consultant can press the Message button , THey hear no sound on the loudspeak as they are listening to 1 min silence so the message is sent discretley with no ringing sound.

If anyone has a better idea or setup, please pipe up.
(This post was last modified: 04-13-2022 07:50 PM by harrys.)
03-31-2022 11:08 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Smile T43U handset only works when headset button is green jaydub 2 1,388 03-21-2024 07:13 AM
Last Post: jaydub
  Provision Button back to blank glennbtn 0 755 01-10-2024 06:34 PM
Last Post: glennbtn
  Call Waiting Beep glennbtn 0 784 12-18-2023 05:22 PM
Last Post: glennbtn
  t46u , call waiting, ring sles 1 1,396 11-30-2023 05:29 AM
Last Post: msachs
  T48U BLF Park Call not working timotel 0 1,220 09-20-2023 07:20 AM
Last Post: timotel
  T48G Connected handset not answering or ending call with connected handset. Pettis 4 3,330 07-27-2023 05:38 AM
Last Post: Lissvazquez
  Disable X button to reject calls hercross 0 1,091 07-07-2023 04:01 PM
Last Post: hercross
  T43U T42S Call Park BLF robm 0 1,331 05-19-2023 12:16 AM
Last Post: robm
  Directed or group pickup call history softnetvoip 1 2,241 03-08-2023 10:53 PM
Last Post: softnetvoip
  Missed Call Does Not Appear in History bcmike 1 2,797 02-01-2023 05:07 AM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication