[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T54W & DD10K USB DECT DONGLE
Author Message
landstartelco Offline
Junior Member
**

Posts: 2
Joined: Jun 2015
Reputation: 0
Post: #1
T54W & DD10K USB DECT DONGLE
When using the T54W along with the DECT Dongle, can the T54W be registered to a W70B base station?

Some documentation indicates it can be while other documentation is vague.

Thomas
02-18-2022 04:52 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
markvdheijden Offline
Junior Member
**

Posts: 33
Joined: Jan 2021
Reputation: 2
Post: #2
RE: T54W & DD10K USB DECT DONGLE
(02-18-2022 04:52 AM)landstartelco Wrote:  When using the T54W along with the DECT Dongle, can the T54W be registered to a W70B base station?

Some documentation indicates it can be while other documentation is vague.

Thomas

Yes this is possible, you need to install the firmware T54W-96.85.0.65.rom and then you can register it to a DECT station W60/70. If you use the other firmware it will act as base station.

Gr. Mark
02-18-2022 05:26 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
pietro3d Offline
Junior Member
**

Posts: 1
Joined: Dec 2018
Reputation: 0
Post: #3
RE: T54W & DD10K USB DECT DONGLE
(02-18-2022 05:26 PM)markvdheijden Wrote:  
(02-18-2022 04:52 AM)landstartelco Wrote:  When using the T54W along with the DECT Dongle, can the T54W be registered to a W70B base station?

Some documentation indicates it can be while other documentation is vague.

Thomas

Yes this is possible, you need to install the firmware T54W-96.85.0.65.rom and then you can register it to a DECT station W60/70. If you use the other firmware it will act as base station.

Gr. Mark

what is the procedure to register the w54w to the dect w70b?
In status/headset I can only register an headset in w54, but not the w54 to w70
(This post was last modified: 05-23-2023 04:26 PM by pietro3d.)
05-23-2023 04:23 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yisroel_MongoTEL Offline
Senior Member
****

Posts: 273
Joined: Jul 2017
Reputation: 13
Post: #4
RE: T54W & DD10K USB DECT DONGLE
(05-23-2023 04:23 PM)pietro3d Wrote:  what is the procedure to register the w54w to the dect w70b?
In status/headset I can only register an headset in w54, but not the w54 to w70

Which firmware is the T54W on?

Take the latest one (96.85.0.95) from the T54W with DD10K page https://support.yealink.com/en/portal/do...0144112ece
05-25-2023 11:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
gio@ahoytel.com Offline
Junior Member
**

Posts: 1
Joined: Jun 2023
Reputation: 0
Post: #5
RE: T54W & DD10K USB DECT DONGLE
(05-25-2023 11:11 PM)Yisroel_MongoTEL Wrote:  
(05-23-2023 04:23 PM)pietro3d Wrote:  what is the procedure to register the w54w to the dect w70b?
In status/headset I can only register an headset in w54, but not the w54 to w70

Which firmware is the T54W on?

Take the latest one (96.85.0.95) from the T54W with DD10K page https://support.yealink.com/en/portal/do...0144112ece

Any updates? Even with the latest firmware (96.85.0.95) there doesn't seem to be any option to connect the T54W to a W70b base station. The documentation seems to indicate this should be possible.
06-08-2023 05:16 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yisroel_MongoTEL Offline
Senior Member
****

Posts: 273
Joined: Jul 2017
Reputation: 13
Post: #6
RE: T54W & DD10K USB DECT DONGLE
(06-08-2023 05:16 AM)gio@ahoytel.com Wrote:  Any updates? Even with the latest firmware (96.85.0.95) there doesn't seem to be any option to connect the T54W to a W70b base station. The documentation seems to indicate this should be possible.

In the Menu (make sure to have the 96.85.0.95 firmware, in the newer 96.86.0.70 I don't see this option) go to Status > Phone Mode and switch it to DECT-DDPhone, then after a reboot (which it prompts you to do) it should be in DECT mode and ask to register to base.

This setting can also be found in the web GUI:
[Image: CaN7ZhN.png]

And also with provisioning paramerer:
Code:
features.phone.mode=1
(This post was last modified: 06-09-2023 05:20 AM by Yisroel_MongoTEL.)
06-09-2023 05:04 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T54w firmware versions elin@klhconsulting 0 30 Today 01:43 AM
Last Post: elin@klhconsulting
  T54W display remains black after power saving. mighty-tower 7 859 08-28-2023 10:29 PM
Last Post: complex1
  T54W Factory Reset Locked? beamtech 1 568 07-29-2023 04:29 PM
Last Post: complex1
  New T54W phones not seeing wifi Chris708 0 440 06-22-2023 11:28 PM
Last Post: Chris708
  T54w firmware download call central 1 1,324 05-31-2023 05:41 PM
Last Post: complex1
  T54W shows voicemails when there are none. LG 5 7,215 05-17-2023 09:52 PM
Last Post: RobFromSouthJersey
  T54W - Hands free mic not used if handset is hanged up Hexanet 0 499 05-09-2023 04:53 PM
Last Post: Hexanet
  T54w - Time and Date on screen babou29 0 753 04-20-2023 02:01 PM
Last Post: babou29
  T54W vpn l2tp no registrering on pbx KM-Systems 0 636 02-07-2023 01:48 AM
Last Post: KM-Systems
  T54W with EXP 50 and WH62 stratos 2 3,436 10-14-2022 11:50 AM
Last Post: Scottie

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication