[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EXP40 Page confusion
Author Message
plewis@bcradesign.com Offline
Junior Member
**

Posts: 7
Joined: Aug 2013
Reputation: 0
Post: #1
EXP40 Page confusion
When Page 1 is selected, pressing a key on that page actually rings someone in the same position on Page 2. E.g. Aaron is in the first position on Page 1, and Dave's in the first position on Page 2. Pressing Aaron's button dials Dave.

We note this problem on 2 different EXP40 connected to the same T48G.

Please advise!

Thanks,

Phil
09-01-2015 02:02 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Michael Offline
Administrator
*******

Posts: 382
Joined: Jul 2015
Reputation: 2
Post: #2
RE: EXP40 Page confusion
hi

for this issue, we have test in our side , it works fine

please upgrade the T48 to the last firmware 35.80.0.70, download link :
http://support.yealink.com/attachmentDow...0.0.70.zip

then reset to test

if issue still exist , please upgrade the firmware of EXP40 with a T46, please refer to the guide below :
http://forum.yealink.com/forum/showthread.php?tid=1414
09-01-2015 05:42 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
plewis@bcradesign.com Offline
Junior Member
**

Posts: 7
Joined: Aug 2013
Reputation: 0
Post: #3
RE: EXP40 Page confusion
(09-01-2015 05:42 AM)Yealink_Michael Wrote:  hi

for this issue, we have test in our side , it works fine

please upgrade the T48 to the last firmware 35.80.0.70, download link :
http://support.yealink.com/attachmentDow...0.0.70.zip

then reset to test

if issue still exist , please upgrade the firmware of EXP40 with a T46, please refer to the guide below :
http://forum.yealink.com/forum/showthread.php?tid=1414

We use 3cx and have upg firmware and reset phones. The issue is intermittent but has happened a couple of times, Reception is losing confidence in the EXP40. We only have T48G, no T46.
09-01-2015 06:17 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
plewis@bcradesign.com Offline
Junior Member
**

Posts: 7
Joined: Aug 2013
Reputation: 0
Post: #4
RE: EXP40 Page confusion
(09-01-2015 06:17 AM)plewis@bcradesign.com Wrote:  
(09-01-2015 05:42 AM)Yealink_Michael Wrote:  hi

for this issue, we have test in our side , it works fine

please upgrade the T48 to the last firmware 35.80.0.70, download link :
http://support.yealink.com/attachmentDow...0.0.70.zip

then reset to test

if issue still exist , please upgrade the firmware of EXP40 with a T46, please refer to the guide below :
http://forum.yealink.com/forum/showthread.php?tid=1414

We use 3cx and have upg firmware and reset phones. The issue is intermittent but has happened a couple of times, Reception is losing confidence in the EXP40. We only have T48G, no T46.
This continues to be a problem.

Is there no other way to upgrade the firmware? We do not own a t46!
Angry
09-24-2015 11:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
plewis@bcradesign.com Offline
Junior Member
**

Posts: 7
Joined: Aug 2013
Reputation: 0
Post: #5
RE: EXP40 Page confusion
This continues to be a problem.

Is there no other way to upgrade the firmware? We do not own a t46!
(This post was last modified: 09-30-2015 01:35 AM by plewis@bcradesign.com.)
09-30-2015 01:34 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
plewis@bcradesign.com Offline
Junior Member
**

Posts: 7
Joined: Aug 2013
Reputation: 0
Post: #6
RE: EXP40 Page confusion
I found a T46 to borrow, I'll be upg. the firmware on the EXP 40 tomorrow.

FYI the problem is VERY intermittent so your quick test will not present the issue. It only happens once every couple of weeks.

Thanks,
Phil
10-20-2015 07:41 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
eth0 Offline
Junior Member
**

Posts: 3
Joined: Sep 2015
Reputation: 0
Post: #7
RE: EXP40 Page confusion
Same Problem here.
Yealink T48G Firmware Version 35.80.0.72 (because of BLF issue on EXP40)
EXP40 1 Hardware Version 66.0.0.0
EXP40 1 Firmware Version 7.16.0.0
11-27-2015 06:57 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T57W Home page Mxyzptlk 1 2,154 10-07-2022 03:54 AM
Last Post: complex1
  Speakerphone page (Intercom) anonymous1711612242218 6 21,453 03-15-2017 09:16 AM
Last Post: Travis_Yealink
  t46 disconnects phone call when it receives a page. jasit 2 10,955 08-20-2014 01:53 AM
Last Post: blendedtech
  T46g EXP40 - BLF not updating after intercom blistovmhz 13 42,026 07-19-2014 11:27 AM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication