[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
W60B Compromised and unable to factory reset
Author Message
socialtelecoms Offline
Junior Member
**

Posts: 2
Joined: Mar 2019
Reputation: 0
Post: #1
W60B Compromised and unable to factory reset
We have a user with a W60B and 3 W52H.

Over Christmas the network and phone were compromised, the admin password changed and a forward was applied to a premium rate number.

We have tried to factory reset the unit multiple ways using the connection button and powering the base on. also by using the reset base station function from the phone handset.

Result: all handsets are unpaired but the Base Station retains the account settings and admin password so we still can't log in.

I can't log into the web interface to get any information from there and the users are not technology savvy.

Are there any suggestions on anything else that can be done?
01-04-2022 07:16 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,549
Joined: Jan 2014
Reputation: 48
Post: #2
RE: W60B Compromised and unable to factory reset
(01-04-2022 07:16 PM)socialtelecoms Wrote:  We have a user with a W60B and 3 W52H.

Over Christmas the network and phone were compromised, the admin password changed and a forward was applied to a premium rate number.

We have tried to factory reset the unit multiple ways using the connection button and powering the base on. also by using the reset base station function from the phone handset.

Result: all handsets are unpaired but the Base Station retains the account settings and admin password so we still can't log in.

I can't log into the web interface to get any information from there and the users are not technology savvy.

Are there any suggestions on anything else that can be done?

Hi,

The best way to help you solve the issue is to contact Yealink support directly using a support ticket.
https://ticket.yealink.com/

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
01-04-2022 09:45 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
socialtelecoms Offline
Junior Member
**

Posts: 2
Joined: Mar 2019
Reputation: 0
Post: #3
RE: W60B Compromised and unable to factory reset
(01-04-2022 09:45 PM)complex1 Wrote:  Hi,

The best way to help you solve the issue is to contact Yealink support directly using a support ticket.
https://ticket.yealink.com/

Thanks. I have raised a ticket.
01-04-2022 11:32 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yisroel_MongoTEL Offline
Senior Member
****

Posts: 296
Joined: Jul 2017
Reputation: 15
Post: #4
RE: W60B Compromised and unable to factory reset
Have you tried doing a reset while it's not connected to the internet? The whole time keep it disconnected from the internet until you finish and log in to the phone's Web GUI (while still disconnected from the internet.)

Factory default process:
  1. Power off the unit by unplugging the power cord from the back (for PoE, disconnect the network cable).
  2. Wait for 15 seconds.
  3. With the unit unplugged, press and hold the connect button on the base station.
  4. While still holding the connect button, plug the power (or network cable if PoE) back into the unit.
  5. Wait until all three lights on the unit are showing as solid green, and release the connect button.
  6. Wait approximately 5 minutes.
  7. Reboot the unit by unplugging it from power for 15 seconds and plugging it back in.
01-07-2022 12:22 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Smile Unable to save changes on my W70B when using a mobile device WelshPaul 1 2,174 05-02-2024 11:58 PM
Last Post: Matt Hannigan
  how to register a T58W with DD10K to a W60B? schogol 6 3,839 04-16-2024 09:54 PM
Last Post: schogol
  How to enable web server/ GUI on W60B and W70B after provisioning has disabled it. jhofford 2 4,936 09-12-2023 08:42 PM
Last Post: jhofford
  Problems setting up W60B and interface issues Ness 4 8,718 03-30-2023 05:24 PM
Last Post: Ness
  Auto Provision firmware on W60B base station hospitale 6 9,145 02-15-2023 05:54 PM
Last Post: hospitale
  recovery mode W60B files Aleskey 3 7,347 02-14-2023 01:42 AM
Last Post: 88fingerslukee
  W60B Constantly Restarts When W73H Is Connected. nolto 0 2,549 02-07-2023 12:15 AM
Last Post: nolto
  W60B factory reset and default login carsey 3 11,289 02-01-2023 02:52 AM
Last Post: complex1
  W60B remove intercom when transfert MYCOMPUTING 2 3,955 12-08-2022 12:17 AM
Last Post: complex1
  W60B base With 56H ( incomming calls, no ringing when charging ) stéphane 3 10,766 12-01-2022 03:15 AM
Last Post: therring

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication